The instructions say 20 minutes to one hour u2014 how do I know which to use?

The processing time scales with hair density, porosity and texture. Around 20u201330 minutes for fine, porous or chemically processed lengths; 35u201340 minutes for coloured but otherwise healthy hair; 50u201360 minutes for thick, resistant, very curly or virgin hair. When in doubt, start on the shorter end and extend on the next service.

Brazilicious Australian Mango Therapy Single Step 1000 ml

Q: Is Brazilicious Australian Mango Therapy Single Step formaldehyde-free?

It uses a glyoxylic-acid technology u2014 Glyoxyloyl Carbocysteine and Glyoxyloyl Keratin Amino Acids u2014 not the older formaldehyde or methylene-glycol solutions. As with all glyoxylic-acid treatments, trace formaldehyde can be released during the 230 u00b0C flat-iron sealing step. This is exactly why the label specifies professional use only, gloves throughout the service and a well-ventilated workspace. Following the in-salon protocol is non-negotiable for both the stylist and the client.

Single-bottle Brazilian smoothing in one professional service. Brazilicious Australian Mango Therapy Single Step — 1000 ml condenses the classic three-step keratin routine into a single thermo-active mask powered by Australian mango oil, coconut oil and hydrolysed silk. Designed for in-salon use, it tames frizz, seals the cuticle and leaves the hair visibly smoother, softer and easier to manage from the very first service.

At a glance

Size: 1000 ml salon bottle (also in 100 ml)
Line: Brazilicious Professional, Australian Mango Therapy
Key actives: Mango oil, coconut oil, hydrolysed silk, glyoxylic-acid complex, panthenol
Hair types: All hair types; adapted protocol for fine, coloured or vulnerable hair
Processing time: 20 minutes to 1 hour, depending on hair type
Origin: Made in Brazil; EU responsible person Sabelle Cosmetics, Belgium

What it is

Australian Mango Therapy Single Step is a one-step thermo-active smoothing mask built around a glyoxylic-acid technology paired with mango oil and coconut oil. Unlike a three-step Brazilian keratin kit — clarifier, treatment, mask — this single bottle delivers cleansing-free smoothing in one application. You apply it on clean, dry hair, leave it to penetrate, rinse, blow-dry and seal with a flat iron. The result is a glossier, more disciplined finish that lasts up to three months with proper home care, with a noticeable softening of frizz and bulk from the very first service.

Key ingredients

Australian mango seed oil (Mangifera Indica): rich emollient that cushions the cuticle and adds a soft, fruity warmth to the formula.
Coconut oil (Cocos Nucifera): penetrating lipid that boosts manageability and reinforces shine.
Hydrolysed silk: light protein film that smooths the surface and helps the hair reflect light evenly.
Glyoxylic-acid complex (Glyoxyloyl Carbocysteine + Glyoxyloyl Keratin Amino Acids): the smoothing engine, activated by heat to restructure the fibre's hydrogen bonds.
Panthenol & arginine: humectant and amino-acid duo that supports softness after the high-heat sealing step.

What you can expect

Expect a clean visual reset on the very first service: smoother surface, controlled volume and a glossy, healthy-looking finish. Texture relaxes by roughly one or two levels — frizz almost disappears, but the natural movement of the hair is preserved. Daily styling time drops noticeably, and a flat iron or blow-dry holds for longer between washes. Results build slightly over the first few days as the cuticle settles, and they last up to three months when paired with the matching home-care routine.

Who it is for

Clients with frizz-prone hair looking for in-salon control without committing to a three-bottle kit protocol.
Wavy to curly textures that want softer, easier-to-style movement rather than a poker-straight finish.
Thick or coarse hair needing visible volume reduction.
Professionals managing busy chairs who want the smoothing result with a shorter service flow.
Returning keratin clients ready for a maintenance service between full multi-step treatments.

Who it is not for

Clients with irritated or broken scalp: the label specifically warns against application on injured skin.
Severely bleached or porous hair without a prior strand test — the high-heat sealing step can be too aggressive.
Self-application at home: the product is labelled for professional use only and requires gloves and ventilation throughout.
Anyone seeking a permanent straightener: this is a semi-permanent service that gradually wears off.

Professional recommendation

Always run a strand test before full service, especially on bleached or chemically processed hair.
Wear gloves throughout the process and work in a well-ventilated area as the label instructs.
Use a calibrated flat iron — a Brazilicious Professional iron gives the most consistent thermal contact.
Section the hair into thin slices for even product saturation and clean flat-iron passes.
Step the temperature down to 160–180 °C on fine, coloured or vulnerable lengths; 230 °C is reserved for resistant, virgin hair.

How to use

Choose one of two protocols. Always perform a strand test on a discreet section first.

A. Standard manufacturer method

Wash & dry: shampoo the hair and blow-dry it fully.
Apply: distribute a generous amount of Australian Mango Therapy Single Step from 1 cm off the scalp through to the ends.
Process: leave on 20 minutes to 1 hour depending on hair type (shorter for fine or porous, longer for thick or resistant).
Rinse: rinse completely until the water runs clear.
Blow-dry: dry the hair fully again with a brush.
Seal: flat-iron strand by strand, about twenty passes per section, at 230 °C — or 160–180 °C for fine, coloured or vulnerable hair.
Wash: the hair can be washed at the end of the service or the next day with the Brazilicious Australian Mango home-care shampoo.

B. Expert salon standard method

Same protocol with the following refinements for maximum performance:

Processing time by hair type: fine or porous 30 min; coloured 35 min; natural / virgin 50 min; thick / resistant 60 min.
Sealing temperature by hair type: fine or coloured 180–200 °C with 10–12 passes; normal 210–220 °C with 12–15 passes; thick or resistant 230 °C with 15–20 passes.
Technique: work in 1 cm horizontal sections, move the iron evenly root-to-tip, add a final pass at the root for longevity.

Safety: For professional use only. Keep out of reach of children. Protect from light and heat. Do not ingest. In case of accidental contact with the eyes, rinse abundantly with water. Apply without touching the scalp; do not use on irritated or injured scalp. Gloves are recommended throughout the process. Perform an allergy test before use.

Compatibility

Single Step is compatible with most chemically treated hair, including coloured and highlighted lengths, with a 14-day buffer after the colour service and a strand test on bleached zones. On hair previously relaxed or chemically straightened, always test first before a full application. To preserve results, the in-salon service is followed at home by the matching Australian Mango Shampoo 300 ml, Australian Mango Conditioner 250 ml and Australian Mango Therapy Masque 300 g.

In short

One-bottle Brazilian smoothing: single-step thermo-active mask replacing the classic three-bottle protocol.
Up to three months of smoother, glossier, easier-to-style hair when paired with the Australian Mango home-care set.
Professional service only: 230 °C sealing, hair-type-tiered protocol, full safety setup mandatory.

Lock in the result at home

Brazilicious Australian Mango Shampoo 300 ml — the gentle daily wash designed for the post-service routine.
Brazilicious Australian Mango Conditioner 250 ml — daily conditioning that respects the freshly smoothed cuticle.
Brazilicious Australian Mango Therapy Masque 300 g — the weekly deep-care that extends smoothness and shine between visits.
Brazilicious Australian Mango Therapy Single Step 100 ml — the travel and single-service size of this same treatment.

Frequently asked questions

Is Brazilicious Australian Mango Therapy Single Step formaldehyde-free?

It uses a glyoxylic-acid technology — Glyoxyloyl Carbocysteine and Glyoxyloyl Keratin Amino Acids — not the older formaldehyde or methylene-glycol solutions. As with all glyoxylic-acid treatments, trace formaldehyde can be released during the 230 °C flat-iron sealing step. This is exactly why the label specifies professional use only, gloves throughout the service and a well-ventilated workspace. Following the in-salon protocol is non-negotiable for both the stylist and the client.

Can I apply Single Step on coloured, highlighted or bleached hair?

Yes on coloured and highlighted hair, with a 14-day buffer after the colour service so the cuticle has time to settle. Bleached or very porous lengths need an extra precaution: always perform a strand test first, and seal at the lower 160–180 °C tier instead of 230 °C. The treatment will not strip your colour, but the high heat can stress already-fragile fibre if the strand test is skipped.

How long do the smoothing results last?

Up to three months with proper home care. The aftercare routine is the lever — washing with the matching Australian Mango shampoo and conditioner, plus a weekly Australian Mango masque, keeps the cuticle disciplined and pushes results closer to the upper end of the range. Sulphate-heavy shampoos, chlorine and very hot daily washing shorten the result.

What is the difference between a Single Step treatment and a multi-step Brazilian keratin kit?

A classic Brazilian keratin protocol uses three bottles: a clarifying shampoo to open the cuticle, the active treatment, and a finishing mask. Single Step compresses that flow into one thermo-active mask that you apply, leave to penetrate, rinse and seal with a flat iron. It is faster on the chair, lighter on inventory, and ideal for maintenance services or clients who do not need the deepest multi-step transformation.

The instructions say 20 minutes to one hour — how do I know which to use?

The processing time scales with hair density, porosity and texture. Around 20–30 minutes for fine, porous or chemically processed lengths; 35–40 minutes for coloured but otherwise healthy hair; 50–60 minutes for thick, resistant, very curly or virgin hair. When in doubt, start on the shorter end and extend on the next service.

Do I need the matching Australian Mango shampoo, conditioner and masque afterwards?

The matching home-care routine is the single biggest factor in how long the result lasts. The Australian Mango shampoo and conditioner are formulated to be gentle enough not to lift the treatment, and the Australian Mango masque tops up the smoothness and shine on a weekly basis. Sulphate-heavy or clarifying home-care will shorten the result noticeably.

Why are gloves and good ventilation recommended during the flat-iron step?

The glyoxylic-acid actives that drive the smoothing release small amounts of vapour when the hair is sealed at 230 °C. Gloves protect the hands during application and combing, and a ventilated workspace keeps the air clear for both stylist and client. The label is explicit on both points and lists the service as professional use only.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.