Honma Tokyo PlastHair Bixyorellan Precious Blend Kit 2x1000ml is a professional two-step Brazilian smoothing-care system for all hair types, from fine and wavy to thick and curly, that need controlled volume with an intensively conditioned finish. Its signature is Bixyplastia technology: instead of only coating the surface the way traditional keratin does, it works with the hair's own cysteine while a blend of six precious Amazonian oils nourishes the fibre, so the result reads as smoother, more disciplined hair rather than a flat, over-processed one.

Why choose this Bixyplastia system

PlastHair Bixyorellan Precious Blend gives stylists one versatile system that controls volume and deeply conditions across very different textures. The Preparation Shampoo deep-cleanses and opens the cuticle, then the Precious Blend Intensive Care Mask carries the Bixyplastia actives and the oil blend into the fibre before heat sealing. Because Bixyplastia works with the hair's natural cysteine rather than only sitting on the surface, it helps support elasticity, strength and resilience while it smooths. The declared INCI of both steps shows no formaldehyde and no formaldehyde-releasing ingredient, so the smoothing comes from the mechanism and the thermal seal, not from a releaser. Both products are made in Brazil for professional salon application or experienced users.

Key ingredients

The Precious Blend formula combines Bixyplastia technology with six precious Amazonian oils and nourishing actives:

• Brazilian nut oil: rich in selenium and omega fatty acids for deep nourishment
• Urukum (annatto) oil: natural antioxidant carrying vitamins A and E
• Passion fruit (Maracujá) oil: natural astringent with vitamins A and C
• Copáiba oil: soothing feel for scalp comfort
• Babassu oil: lightweight moisture that adds shine without weighing hair down
• Pracaxi oil: high in behenic acid for smoothing and conditioning
• D-Panthenol (vitamin B5): supports strength and brings a brilliant shine
• Mel extract (honey): natural humectant for lasting hydration
• Butyrospermum Parkii (shea butter): deep conditioning and moisture retention
• Hydrolyzed keratin: supports the hair fibre and a smoother finish

Step 1 shampoo ingredients: Aqua, Sodium Lauryl Sulfate, Cocamide DEA, Cocamidopropyl Betaine, Propylene Glycol, Glycerin, Parfum, Polyquaternium-7, Phenoxyethanol, EDTA, Sodium Chloride, Citric Acid, Benzyl Benzoate, Hydrolyzed Keratin, Limonene, Citral.

Step 2 mask ingredients: Aqua, Cetrimonium Chloride, Cetearyl Alcohol, Paraffinum Liquidum, Hydrolyzed Keratin, Cyclopentasiloxane, Butyrospermum Parkii Butter, Polyquaternium-7, Propylene Glycol, Mel Extract, Panthenol, Phenoxyethanol, Benzyl Benzoate, Parfum, Hydroxypropylcellulose, Limonene, Citral.

What to expect

Used correctly, the system delivers an intensive filling and smoothing effect: hair looks and feels smoother, frizz comes under control and volume is visibly reduced. In salon use the line is positioned for a 50-70% reduction in volume and a 70-90% smoothing result, with the exact degree set by hair type and flat-iron technique. A protective film forms around the cuticle to help the result hold with proper application and aftercare.

• Controlled volume and more manageable, disciplined hair
• Smoother, frizz-reduced fibre with a glossy finish
• High hydration, silkiness and a brilliant shine
• Supported elasticity, strength and resilience of the hair fibre

Who it is for

• All hair types: fine, medium, thick, curly and wavy
• Fine hair that needs volume control with an intensively conditioning effect
• Curly hair types 3A, 3B and 3C
• Natural and virgin hair
• Coloured or bleached hair
• Hair that needs smoothing with maximum oil nourishment
• Clients who want volume control without a completely straight finish
• Professional stylists looking for one versatile all-rounder across textures

Who it is not for

• Pregnant or breastfeeding clients, for whom this treatment is not recommended
• Children: the treatment is intended for ages 12 and over
• Anyone hypersensitive to a component of either formula, including the fragrance allergens limonene, citral and benzyl benzoate
• Clients who want a no-heat treatment: sealing needs a flat iron and cannot be skipped
• Home users who are not ready for the faint warm-oil scent that lingers after sealing

Professional tip

Diagnose porosity before the mask, because it sets the pre-dry: less porous hair is dried to about halfway so it still draws the actives in, while very porous hair is dried fully so it does not flood. Keep the mask about 1 cm off the scalp, comb it through for an even coat, and resist overloading the section, since too much product on the strand is what causes smoke and an off scent at the iron.

How to use

This is a two-step professional protocol. Method A is the manufacturer sequence written out step by step; Method B is the wider Brazilian salon technique with this kit's own values folded in. Always begin with a strand test and a patch test.

Method A: the manufacturer method

1. On wet hair, apply a small amount of PlastHair Bixyorellan Preparation Shampoo.
2. Massage into the roots and work through to the ends.
3. Rinse well, leaving no product residue.
4. Repeat the wash twice more, or as needed, until hair is fully clean.
5. Read the porosity to set your pre-dry: grade 1 (intensive), dry hair to about 50%; grade 2 (super intensive), dry hair to 100%.
6. Apply the Precious Blend Intensive Care Mask lock by lock.
7. Cover the full length of each strand, keeping 1 cm away from the roots.
8. Align with a fine-tooth comb so the product sits evenly.
9. Leave on for 20 minutes.
10. Dry to 100% with a warm to hot dryer, no brushing needed.
11. Flat-iron thin strands until each is fully sealed, using 180-230°C to suit the hair type.
12. Let the hair cool for 15 to 20 minutes.
13. Rinse thoroughly with warm water until the product is completely removed, then finish as desired.

Method B: the Brazilian method

1. Wash the hair 2 to 3 times with the Preparation Shampoo until it is squeaky clean and free of residue.
2. For very damaged or porous hair, dry only to about 50% before the mask; for normal or resistant hair, dry to 100%.
3. Apply the mask generously, 1 cm from the roots.
4. Comb through with a fine-tooth comb for an even coat.
5. Process for 20 minutes; a heat cap can be used for a more intensive result.
6. Dry to 100% with a warm dryer and do not brush.
7. Divide the hair into 4 sections.
8. Flat-iron each strand for 7 to 14 passes at the temperature that suits the hair (see the guide below).
9. Let the hair cool completely before rinsing.
10. Rinse thoroughly with warm water only, no shampoo.

Where it fits in the Honma Tokyo range

Precious Blend is the all-rounder of the Bixyorellan family, one kit for the widest span of textures. For a colour-conscious option the Honma Tokyo PlastHair Bixyorellan Passion Fruit Kit 2x1000ml is aimed at coloured or bleached hair, and the Honma Tokyo PlastHair Bixyorellan Jabuticaba Kit 2x1000ml adds a violet tone for blondes. To restock only the first step, the PlastHair Bixyorellan Preparation Shampoo Step 1 1000ml is sold on its own. For coarse, resistant hair the Coffee Premium Keratin Kit 3x1000ml is the stronger sibling.

In short

• Professional 2-step Bixyplastia smoothing care for all hair types, made in Brazil.
• Six precious Amazonian oils with D-Panthenol, honey, shea butter and hydrolyzed keratin.
• Works with the hair's natural cysteine to support elasticity, strength and resilience.
• Positioned for a 50-70% volume reduction and a 70-90% smoothing result by hair type and technique.
• No formaldehyde or formaldehyde-releaser in the declared INCI of either step.
• Professional application with a flat-iron seal, followed by sulfate-free aftercare.