INOAR G.HAIR 3-Step Keratin Treatment Kit | Professional Smoothing System | 3 x 1000 ml

Transform coarse, frizzy hair into smooth, radiant perfection with INOAR G.HAIR: a complete 3-step professional keratin system designed for long-lasting results.

Product Overview

The INOAR G.HAIR 3-Step Kit delivers salon-grade Brazilian keratin smoothing in a single, cohesive system. This professional trio works in synergy to deeply cleanse, infuse keratin, and seal the cuticle for exceptional shine and frizz control lasting up to 5 months.

Key Benefits

Each step of the INOAR G.HAIR system supports a full professional keratin protocol that strengthens, smooths, and revitalizes resistant hair.

• Eliminates frizz and enhances shine for up to 5 months
• Reduces blow-drying and styling time by up to 60%
• Rebuilds damaged hair fibers with hydrolyzed keratin and amino acids

Star Ingredients

This professional keratin kit combines advanced smoothing technology with nourishing botanical actives.

• Hydrolyzed Keratin: Reinforces hair structure for long-lasting strength
• Argan Oil: Restores softness and enhances natural shine
• Amino Acid Complex: Realigns cuticles and seals in smoothness
• Cocoa Extract: Provides antioxidant protection and smooth texture

Formaldehyde notice: Treat as a potential formaldehyde-releasing keratin system. Follow local regulations and salon safety protocols.

How to Use

This is a professional keratin smoothing system. Use only in a well-ventilated area. Avoid contact with eyes and skin, and always wear gloves during application.

There are two professional application methods (“Protocols”) for this smoothing system. Select one complete protocol: the Manufacturer Method or the Expert Salon Method. Follow all steps of the chosen protocol, and always perform a strand test before full application.

A. Manufacturer Method: Official 3-Step Workflow

This method follows the exact official instructions provided by INOAR, as outlined on the product packaging and verified through INOAR’s professional training materials. It represents the brand’s authentic salon procedure for achieving the original G.HAIR straightening and smoothing results. The detailed step-by-step procedure is as follows:

1. Preparation with G.HAIR Deep Cleansing Shampoo: Step 1

• Wash hair with G.HAIR Deep Cleansing Shampoo.
• Massage for 2–3 minutes to remove buildup and open the cuticles.
• Rinse thoroughly and repeat if needed until hair feels clean and residue-free.
• Towel-dry to remove excess water.
• Blow-dry to 80% for moderately curly hair, or 100% for very curly or resistant hair.

2. Application of G.HAIR Anti-Volume Treatment: Step 2

• Divide the hair into four sections.
• Using a tint brush, apply G.HAIR Keratin Treatment: Step 2 1 cm from the scalp.
• Comb through with a fine-tooth comb to ensure even distribution of the product.

3. Processing

Allow the product to process for 20 minutes at room temperature.

4. Do Not Rinse

Proceed directly to the blow-drying stage without rinsing.

5. Blow-Drying

Blow-dry the hair completely (100%) on medium to high heat, using a nozzle to align the strands smoothly.

6. Heat Sealing

Work in very thin sections and flat-iron each strand 7–10 times, adjusting heat according to hair type:

• Normal hair: up to 204 °C (400 °F)
• Very thick or resistant hair: up to 250 °C (480 °F)
• Allow the hair to cool for 15 minutes before rinsing.

7. Post-Treatment Care with G.HAIR Finishing Mask: Step 3

• After cooling, rinse hair with water only.
• Apply G.HAIR Finishing Mask: Step 3, leave on for 5 minutes, then rinse thoroughly.
• Style as desired.

B. Expert Method: Standardized Salon Protocol (G.HAIR System)

This expert salon protocol represents the universal professional method for applying keratin treatments such as the INOAR G.HAIR Keratin System. It differs from the Manufacturer Method in three main ways:

• Processing time: slightly longer (30–60 minutes) to ensure uniform penetration across all hair types.
• Heat temperature: controlled range of 180–230 °C (356–446 °F), adjustable by hair type, condition, and the client’s desired level of smoothness.
• Technique focus: full blow-dry before sealing, no rinse before ironing, and precise sectioning for consistent heat distribution.

The Expert Method provides a flexible, salon-verified process balancing smoothing intensity, client comfort, and long-term durability, while maintaining alignment with G.HAIR’s keratin and amino acid technology.

Longevity of the results: When performed correctly, G.HAIR results last 6–8 months. Duration depends on aftercare, home maintenance, and water quality. Use sulfate-free maintenance products such as the Cadiveu Anti-Frizz Shampoo & Conditioner Duo to extend results. Hard or chlorinated water and frequent heat styling may reduce longevity.

The detailed step-by-step procedure is as follows:

1. Deep Cleansing with Shampoo

Cleanse the hair thoroughly using G.HAIR Deep Cleansing Shampoo: Step 1 to remove impurities and open the cuticle layer.

• Wash 2–3 times to remove excess oil, residue, and buildup.
• Massage gently from scalp to ends for even cleansing.
• Rinse thoroughly between washes until the hair feels slightly coarse.
• Towel-dry, then blow-dry completely (100%) using medium to high heat.
• Ensure no moisture remains before applying Step 2.

2. Application of the Keratin Treatment

Apply G.HAIR Anti-Volume Treatment: Step 2 evenly for complete fiber coverage.

• Divide the hair into four sections for precision.
• Apply 1 cm from the scalp using a tint brush.
• Comb through with a fine-tooth comb to distribute product evenly.
• Ensure a thin, even layer — not dripping — for uniform sealing.

3. Processing Time

Allow the treatment to rest for full absorption. Processing time depends on hair texture:

• Fine or fragile hair: ± 30 minutes
• Normal to resistant hair: 45–60 minutes

4. Do Not Rinse

Do not rinse before sealing. Keeping the product in the hair allows for complete thermal activation.

• Leave the product on during blow-drying and ironing.
• This enables G.HAIR’s keratin, amino acids, and cocoa extract to crystallize inside the hair shaft.
• Rinsing early weakens results and reduces frizz control.

5. Blow-Drying

Dry hair completely to prepare for heat sealing.

• Use a professional dryer with a nozzle for control.
• Apply medium to high heat and consistent tension for alignment.
• Direct airflow downward to smooth the cuticle and enhance shine.

6. Heat Sealing

Seal the keratin using controlled titanium heat for lasting results.

• Work in thin sections (0.5–1 cm).
• Use a titanium iron such as the Lizze Extreme Titanium Straightener.
• Perform 10–20 passes per strand, adjusting temperature by hair type:
• Fine or color-treated hair: 180–200 °C (356–392 °F)
• Normal hair: 200–210 °C (392–410 °F)
• Coarse or resistant hair: 210–230 °C (410–446 °F)
• Use steady, even motion from root to tip, focusing extra passes near the roots for alignment.
• After sealing, avoid washing or tying the hair for 48 hours.

7. Post-Treatment Care with G.HAIR Finishing Mask (Step 3)

• After 48 hours, rinse hair thoroughly with water and apply G.HAIR Finishing Mask: Step 3.
• Leave on for 5–10 minutes to rebalance hydration and pH.
• Rinse thoroughly and style as desired.
• If slight waves reappear, re-seal with 2–4 quick flat-iron passes at the same temperature range.

Who It’s For

Ideal for coarse, curly, or chemically treated hair seeking long-term frizz control and radiant smoothness. For professional salon application.

Product Specs

Essential specifications for selection and salon planning.

• Type: Professional Brazilian Keratin Smoothing Kit
• Use: Professional only
• Size: 3 × 1000 ml. Also available in 3 × 250 ml kit.
• Key components: Step 1 Clarifying Shampoo, Step 2 Keratin Treatment, Step 3 Finishing Mask
• Origin: Brazil

For full product specifications please refer to the specifications tab above.

Expected Results

Visible smoothing and frizz control with professional durability.

• Up to 98% reduction in frizz
• Noticeably smoother, shinier hair from first use
• Results last up to 5 months
• Stronger, more manageable strands over time

Summary

The INOAR G.HAIR 3-Step Kit offers a complete, professional keratin smoothing ritual that restores health and shine while protecting against humidity. Trusted by stylists for consistency, safety, and long-lasting results.