JRL Vortice .1 Hair Dryer Yellow | up to 2400 W, 77000 RPM

The JRL Vortice .1 Hair Dryer Yellow is a hair dryer engineered for professional use: the dryer for the blow-dry after the wash or the cut. It runs at 77000 RPM with up to 2400 W of power and weighs 370 g. A Turbo button on the handle increases the airflow when the bulk of the water has to come out. A styling concentrator and a smoothing nozzle come in the box.

JRL Vortice .1 at a glance

Speed: 77000 RPM
Power: 2150–2400 W, 220–240 V~, 50/60 Hz
Motor: brushless DC, rated by JRL for up to 3000 hours
Speed settings: 2 (I low, II high, 0 off)
Temperature settings: 2
Turbo: button on the handle, increases the airflow
Cool shot: button on the handle
In the box: styling concentrator, smoothing nozzle
Weight: 370 g
Size: 16.2 × 23.8 cm
Power cord: 3.5 m
Warranty: 1 year JRL, plus your legal guarantee
Colour: yellow

Why the JRL Vortice .1

A blow-dry at the chair runs in two passes: first the water comes out, then the hair is styled section by section. This dryer is set up for both. High speed and Turbo take the first pass. Low speed, the heat setting you choose and the styling concentrator take the second.

Key features

Turbo button: press once for more airflow, press again to go back
Two speeds: I low for styling, II high for drying
Two heat settings, to match the hair type and the style
Cool shot button
Styling concentrator and smoothing nozzle
Graphene heating technology by JRL
Negative-ion function (JRL)
Designed for low-noise operation in the salon
LED indicator that lights up when the dryer is on, and a hanging loop at the base of the handle

Which setting for which hair

Drying time depends on the hair more than on the dryer. Dense, coily or very long hair holds more water: give it a longer first pass on II with Turbo before you start the sections. Fine or thin hair dries faster and often needs only I with the lower heat setting. How light 370 g feels depends on the hand and on the length of the session.

Who it is for

Salon and barbershop professionals: JRL engineered it for professional use
Volume blow-dries: JRL positions it as its lightweight volume styler
Not for wigs or synthetic hairpieces: it is meant for drying and styling human hair only

Professional tip

Our rule: Turbo is for the water, the settings are for the sections. We take the bulk out on II with Turbo, then step down to I and the heat we style with before the brush goes in. For the sections we put the styling concentrator on, and we finish each one with the cool shot button before the brush lets go.

How to use

Make sure your hands are dry, then plug the dryer in.
Push the airflow switch from 0 to I: the LED indicator lights up.
Dry the water out on II with Turbo on; press Turbo again to go back.
Switch to I, choose your heat setting and work section by section.
Switch it off at 0, unplug it and let it cool before you put it away.

Safety: Before first use, check that the voltage on the label on the dryer is the correct one: the wrong voltage can damage the dryer and void the warranty. Never use it near a bath, shower, basin or other water, and never immerse it. Unroll the cord fully, never wrap it around the dryer and use it only at room temperatures between 0 °C and 40 °C. If it has been dropped or damaged, stop using it and contact the JRL after-sales service.

Care and storage

After use, unplug the dryer and give it time to cool before you touch the grille. Store it in a dry place.

Complete your blow-dry setup

For the blow-dry - round brushes in two sizes

JRL Professional Round Brush BR1 (32 mm)

JRL Professional Round Brush BR1 (43 mm)
Prep and section - clips for sectioning and a mister for the water

JRL Professional Hair Clips 6-Pack

JRL Professional Mist Spray Bottle, 240 ml
Round out the station - to show the client the result

JRL VISTA Professional Hand Mirror

Frequently asked questions

When do I use the Turbo button on the JRL Vortice .1?

For the first pass, while the hair is still wet. Then switch to the speed and temperature setting you style with for the sections.

What should I check before the first use?

The voltage on the label on the dryer itself: the wrong voltage can damage the dryer and void the warranty.

How do I look after the dryer between clients?

Keep the rear air intake clear of hair and dust, and clear it only with the dryer unplugged. Clean it without abrasive products and without anything that contains phenylphenol.

Can I use this dryer on an extension cord?

JRL does not recommend an extension cord. Plug the dryer straight into the wall socket and unroll the 3.5 m cord fully before you switch it on.

Need help with your order? Visit our customer service center and online shopping FAQ for delivery, payment and returns.

Precautions for use

Heated appliances
Applies to: hair dryers, straighteners, curling irons, hot-air brushes, heated rollers, hood dryers and steamers.

Read the manual before first use and keep it.
Plates, barrels and air outlets get hot. Do not touch them and keep them away from skin, eyes and scalp.
Do not use near water, a bath, basin or shower. Always unplug after use.
Do not use with a damaged cord or housing, and do not wrap the cord around the appliance.
Do not use on wet hair, unless the manual allows it.
Let the appliance cool down on a heat-resistant surface before storing it. Keep the cord away from hot parts.
Keep the air inlet of hair dryers free of hair and dust.
Keep out of reach of children, also while cooling down. Never leave a switched-on appliance unattended.

Always read the label and the instructions of the product itself.