BaBylissPRO FoilFX02 Titanium Double-Foil Shaver Head

The BaBylissPRO FoilFX02 Titanium Double-Foil Shaver Head and Cutters - Silver - 44 mm is the genuine replacement cutting head for the FOILFX02 foil shaver -- and the unbadged one, so it fits every shaver in the range whatever finish yours wears. Two titanium foils sit over two independent cutters across a 44 mm shaving zone.

At a glance

What it is: Genuine FOILFX02 replacement cutting head -- double foil plus two cutters
Best for: Bringing any worn FOILFX02 shaver back to a close, smooth finish
Fits: FOILFX02 shaver FXFS2E, and any BaBylissPRO FOILFX02 double-foil shaver
Does not fit: Single-foil FOILFX01 / FXFS1E shavers
Foils: Titanium double foil
Shaving zone: 44 mm
In the box: One double-foil head and two cutters

Why the plain head is the practical spare

On a foil shaver the head does the cutting, not the motor: the thin perforated foil catches the hair and the cutter underneath shears it. Both wear out, and the shave starts to tug long before the tool does anything else wrong. This is the same titanium double-foil head as the colour-matched versions, without the finish -- so it is the one to keep on the shelf if you run more than one FOILFX02.

Key features

Double-foil head: two titanium foils over two independent cutters -- the layout that lets one tool fade a bald blend and clean the hairline.
Titanium foils: chosen for holding a fine edge and staying gentle in contact around sensitive necklines.
44 mm shaving zone: the full width the FOILFX02 shavers are built around.
Fits the whole range: one spare covers the GunSteel, Gold and Chameleon shavers as well as the plain FXFS2E.

What to expect

Fitted correctly the head clicks into place and sits flush, and the shave feels close again. The double foil is built for finishing -- fusing a bald fade and shaving the hairline, neck and cheeks clean -- not for taking down length.

Who it is for

Any FOILFX02 owner whose shave has started to tug or lost its closeness.
Shops running several shavers: one part number covers every finish in the range.
Anyone who values function over finish and would rather not pay for a colour match.

Who it is not for

Single-foil owners: the FOILFX01 / FXFS1E takes the single-foil head, not this double one.
If you want the matching finish: the GunSteel, Gold and Chameleon heads are the same part in a colour-matched trim.
If you need to remove length: a clipper or trimmer does that; this head is for finishing.

Professional tip

Because the head is interchangeable across the range, keep one plain spare for the whole station rather than a colour-matched head per shaver. Swap at the first hint of tug instead of pressing harder on the foils -- pressure wears the foil faster and is tougher on the skin.

How to use

Switch off the shaver before you touch the head.
Release the used head with the catch on the shaver and lift it away.
Align the new head and press until it clicks and sits flat.
Oil the foils and cutters with a light drop of clipper oil.
Test on a small area before you start work.

Safety: the foils and cutters are sharp -- hold the head by its frame, keep it away from children, and do not press hard on the foils. It is a dry accessory: brush it clean, never rinse or immerse it.

Using it with your tools

Brush the hair out of the foils after each client and add a drop of clipper oil to the cutters; do not immerse the head. It is the genuine original for the plain FOILFX02 shaver FXFS2E, and it drops into any BaBylissPRO FOILFX02 double-foil shaver, so a single spare covers the whole range.

In short

Genuine replacement: the original double-foil head for the FOILFX02 range.
Two foils, two cutters: titanium, 44 mm shaving zone.
One spare, every finish: fits FXFS2E and any BaBylissPRO FOILFX02 shaver.

Complete your kit

BaBylissPRO FoilFX02 Shaver GunSteel FXFS2GSE -- this head fits it
BaBylissPRO FoilFX02 Shaver Gold FXFS2GE -- this head fits it too
BaBylissPRO FoilFX02 Shaver Chameleon FXFS2IE -- and this one
BaBylissPRO accessories and replacement parts -- oil, guards and other spares

Frequently asked questions

Which shavers does this head fit?

It fits the plain BaBylissPRO FOILFX02 shaver (FXFS2E) and is interchangeable with any BaBylissPRO FOILFX02 double-foil shaver -- including the GunSteel, Gold and Chameleon versions. One spare covers the whole range.

Is the silver head different from the gold or chameleon one?

Only in finish. All of them are the same titanium double-foil head with two cutters and the same 44 mm shaving zone, and all are interchangeable across the FOILFX02 range. Pick this one for function, or a colour-matched head if you want it to match your shaver.

Does it fit the single-foil FOILFX01 or FXFS1E?

No. That shaver uses a single-foil head and this is a double-foil head, so the two are not interchangeable. Match the head to your shaver and choose the single-foil part for a FOILFX01.

How often should I replace the foils and cutters?

There is no fixed schedule -- the foils and cutters are wear parts. Change the head when the shave starts to tug or no longer finishes as close, rather than after a set number of weeks.

Do the foils and cutters need oiling?

Yes. Brush the clippings out and add a drop of clipper oil to the cutters after each use. Even a fresh head runs better and lasts longer when it is kept clean and lightly oiled.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.