BaBylissPRO FoilFX02 Gold Titanium Shaver Head

The BaBylissPRO FoilFX02 Titanium Double-Foil Shaver Head and Cutters - Gold - 44 mm is the genuine replacement cutting head for the BaBylissPRO FOILFX02 Gold foil shaver -- two gold titanium foils over two independent cutters across a 44 mm shaving zone. It is the wear part you fit when the shave stops feeling close, and it is interchangeable across the whole FOILFX02 range.

At a glance

What it is: Genuine FOILFX02 replacement head -- double foil plus two cutters
Best for: Bringing a worn Gold shaver back to a close, smooth finish
Foils: Gold titanium double foil
Shaving zone: 44 mm
Fits: FXFS2GE, and any BaBylissPRO FOILFX02 double-foil shaver
Does not fit: Single-foil FOILFX01 / FXFS1E shavers

Why keep a spare head

On a foil shaver the head does the cutting, not the motor: the thin perforated foil catches the hair and the cutter underneath shears it. Both are wear parts -- over time the foil thins and the cutter edges round off, and the shave starts to tug and no longer finishes as close. A fresh head brings that closeness straight back, which is why a busy barber keeps one on the shelf.

Key features

Double-foil head: two gold titanium foils over two independent cutters -- the layout that lets one tool fade a bald blend and clean the hairline.
Titanium foils: chosen for holding a fine edge and staying gentle in contact around sensitive necklines.
44 mm shaving zone: the full width the FOILFX02 shavers are built around.
Gold finish: matched to the Gold shaver, and interchangeable with every other FOILFX02 head.

What to expect

Fitted correctly the head clicks into place and sits flush, and the shave feels close again from the first pass. The double foil is built for finishing -- fusing a bald fade and shaving the hairline, neck and cheeks clean -- not for taking down length.

Who it is for

Gold shaver owners whose shave has started to tug or lost its closeness.
Any FOILFX02 user: the head is interchangeable across the double-foil range.
Busy shops that would rather swap a head in seconds than lose a chair.

Who it is not for

Single-foil owners: the FOILFX01 / FXFS1E takes the single-foil head, not this double one.
If you need to remove length: a clipper or trimmer does that; this head is for finishing.
If your shaver has a motor fault: a new head fixes a dull shave, not a power problem.

Professional tip

Keep two heads in rotation and swap at the first hint of tug instead of pressing harder on the foils. Pressure wears the foil faster and is tougher on the skin, while a fresh head does the work for you.

How to use

Switch off the shaver before you touch the head.
Release the used head with the catch on the shaver and lift it away.
Align the new head and press until it clicks and sits flat.
Oil the foils and cutters with a light drop of clipper oil.
Test on a small area before you start work.

Safety: the foils and cutters are sharp -- hold the head by its frame, keep it away from children, and do not press hard on the foils. It is a dry accessory: brush it clean, never rinse or immerse it.

Using it with your tools

Brush the hair out of the foils after each client and add a drop of clipper oil to the cutters; do not immerse the head. It is the genuine original for the BaBylissPRO FoilFX02 Shaver Gold FXFS2GE, and it drops into any BaBylissPRO FOILFX02 double-foil shaver, so one spare can cover more than one tool.

In short

Genuine replacement: the original double-foil head in the Gold finish.
Two foils, two cutters: gold titanium, 44 mm shaving zone.
Fits the range: FXFS2GE and any BaBylissPRO FOILFX02 shaver.

Complete your kit

BaBylissPRO FoilFX02 Shaver Gold FXFS2GE -- the shaver this head is made for
BaBylissPRO Boost+ SkeletonFX Trimmer Gold FX7870GBPE -- the matching trimmer in the same finish
BaBylissPRO accessories and replacement parts -- oil, guards and other spares

Frequently asked questions

Which shavers does this head fit?

It fits the BaBylissPRO FOILFX02 Gold shaver (FXFS2GE) and is interchangeable with any BaBylissPRO FOILFX02 double-foil shaver. One spare head can therefore cover more than one tool on your station.

Is the Gold head different from the other finishes?

Only in finish. Every FOILFX02 head is the same titanium double-foil head with two cutters and the same 44 mm shaving zone, and all of them are interchangeable across the range. Pick the finish that matches your shaver, or any other one if you would rather not match.

Does it fit the single-foil FOILFX01 or FXFS1E?

No. That shaver uses a single-foil head and this is a double-foil head, so the two are not interchangeable. Match the head to your shaver and choose the single-foil part for a FOILFX01.

How often should I replace the foils and cutters?

There is no fixed schedule -- the foils and cutters are wear parts. Change the head when the shave starts to tug or no longer finishes as close, rather than after a set number of weeks.

Do the foils and cutters need oiling?

Yes. Brush the clippings out and add a drop of clipper oil to the cutters after each use. Even a fresh head runs better and lasts longer when it is kept clean and lightly oiled.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.