BaBylissPRO FXONE LO-PROFX Grey Clipper

The BaBylissPRO FXONE LO-PROFX Grey Clipper (FX829E) is a low-profile fade clipper built for close, controlled cutting -- an ultra-thin Blue Titanium blade, a 5-position taper lever and an N1 digital motor, all running on the interchangeable FXONE battery that every FXONE tool shares. It is cordless, ultra-low-profile and finished in grey, made to sit light in the hand through a full day of fades and blends.

At a glance

What it is: FXONE LO-PROFX low-profile fade clipper, grey
Best for: Fades, tapers, blending and bulk cutting
Motor: N1 digital motor with dual ball bearings, 6,800 RPM
Blade: Ultra-thin Blue Titanium MIM fade blade, zero-gap adjustable, built-in oil reservoir
Power: Interchangeable snap-in FXONE Li-ion, cordless, up to 2h30, dual-voltage base
Adjustment: 5-position taper lever (0.5, 1.3, 2.1, 2.9 and 4.2 mm) + 8 guide combs
Profile: Ultra-low-profile metal shield cover, ergonomic grip, grey

Why a low-profile fade clipper

A fade clipper earns its place on how close and how controlled it cuts. The FXONE LO-PROFX keeps a low, flat profile so the blade sits close to the skin and stays easy to steer through a blend, while the 5-position taper lever shifts length without swapping combs. Because it runs on the shared FXONE battery, it drops into the same charging system as the rest of your FXONE tools -- one battery type across the kit, no separate charger to track. It is the everyday cutting clipper a professional reaches for first, ready to build the fade before the trimmer ever comes out.

Key features

N1 digital motor: an N1 digital motor with dual ball bearings holds a steady 6,800 RPM, so the blade keeps its speed through longer, thicker hair.
Blue Titanium fade blade: an ultra-thin Blue Titanium metal-injection-molded (MIM) fade blade, zero-gap adjustable, with a built-in oil reservoir for constant lubrication and a lower blade temperature.
5-position taper and combs: a 5-position locking taper lever (0.5, 1.3, 2.1, 2.9 and 4.2 mm) plus 8 guide combs set every working length.
Shared FXONE battery: the interchangeable snap-in FXONE Li-ion gives up to 2h30 cordless, with a quick-release button and a 4-stage LED ring; the same battery fits every FXONE tool.
Low-profile metal build: an ultra-low-profile metal shield cover and an ergonomic grip keep it light and close to the skin, charged on the included dual-voltage base.

What to expect

This is a cutting clipper -- bulk removal, tapers, fades and blends. It runs cordless on the snap-in FXONE battery and tops up on its dual-voltage base; there is no corded pass-through while cutting. It is not a detail outliner or a shaver: pair it with the matching FXONE LO-PROFX grey trimmer (FX729E) for lines and edges, and an FXONE foil shaver for the finish -- all three share the same FXONE battery.

Who it is for

Barbers and stylists who want a low-profile fade clipper on the shared FXONE battery system.
Fade and blend work: the ultra-thin blade and taper lever build a clean, close gradient.
FXONE users who want one battery type across every tool in the kit.

Who it is not for

If you need lines and detail: add the matching FXONE LO-PROFX grey trimmer (FX729E), which handles edges and outlines.
If you want the fuller all-metal build: the FXONE All-Metal Gold and Black clippers run the same FXONE battery in a heavier metal body.
If you need corded running: the clipper is cordless-only and runs on the snap-in battery.

Professional tip

Keep a second FXONE battery charged on the base while you cut and swap it in the moment the ring drops -- because every FXONE tool shares the battery, a spare keeps the whole kit moving. Set the fade with the taper lever first and only reach for combs when you need a guaranteed guard length; the lever lets you graduate the blend without breaking your pass.

How to use

Charge the FXONE battery fully on its dual-voltage base before the first use.
Snap the battery into the clipper and set the length with the taper lever or a guide comb.
Build the fade upward in small passes, flicking out to soften each transition.
Drop the lever toward zero-gap for the closest, cleanest baseline.
Oil the blade lightly after use and brush out the cut hair.
Return the battery to its base so the clipper is ready for the next cut.

Safety: The blade is sharp -- keep fingers clear of the cutting edge and store the clipper with its guard on. This is a grooming tool, not a wet shaver: keep it and its base away from water and do not immerse them. Charge only with the supplied dual-voltage base, keep the battery away from heat, and store the clipper out of reach of children.

Care and maintenance

Brush the cut hair from the blade after every use and add a few drops of clipper oil along the teeth to keep it running smoothly and at a lower blade temperature. Re-set the blade to zero-gap with the supplied tool if it drifts, and fit a matching BaBylissPRO replacement blade from the BaBylissPRO accessories page when it dulls. Charge the FXONE battery on its dual-voltage base and keep the quick-release contacts clean. The FX829E shares its interchangeable FXONE battery with the wider FXONE range, pairs with the FXONE LO-PROFX grey trimmer (FX729E) for lines and detail, and works alongside the BaBylissPRO Levante dryer to finish the look.

In short

Low-profile fade clipper: an ultra-thin Blue Titanium blade and a 5-position taper lever for a close, controlled gradient.
On the FXONE battery: 6,800 RPM, cordless, up to 2h30 on the shared interchangeable FXONE battery.
Grey, travel-ready: ultra-low-profile metal, dual-voltage base, easy to pair with the matching trimmer.

Complete your FXONE kit

BaBylissPRO FXONE LO-PROFX Grey Trimmer FX729E -- the matching trimmer -- lines, edges and detail
BaBylissPRO FXONE LO-PROFX Grey Duo -- the clipper and trimmer together as the matched duo
BaBylissPRO Levante Hair Dryer 2100W -- lightweight professional dryer to finish the look

Frequently asked questions

Does this clipper share a battery with other FXONE tools?

Yes. The FX829E runs on the interchangeable FXONE Li-ion battery that snaps into every FXONE tool, so one battery type powers your whole kit. It ships with an FXONE battery and a dual-voltage charging base, and a spare battery from another FXONE tool drops straight in, so you can keep cutting while one charges.

Can I use it abroad?

Yes. The charging base is dual-voltage, so it works on any mains worldwide -- you only need a plug adapter for the socket shape, not a voltage converter. An adapter changes the plug; it does not change the voltage, and the dual-voltage base handles the rest.

Can I run it with a cord plugged in?

No. The clipper is cordless-only and runs on the snap-in FXONE battery; there is no corded pass-through while cutting. You charge the battery on its base between uses, and a second FXONE battery lets you keep working while one charges.

What blade and lengths does it cut?

It uses an ultra-thin Blue Titanium fade blade, zero-gap adjustable, with a 5-position taper lever (0.5, 1.3, 2.1, 2.9 and 4.2 mm) and 8 guide combs. Drop the lever toward zero-gap for the closest baseline and step it up to graduate a fade without swapping combs.

How do I keep the blade cutting well?

Brush out the hair and add a few drops of clipper oil along the blade after each use. Re-set the blade to zero-gap with the supplied tool if it shifts, and fit a matching BaBylissPRO replacement blade once it dulls. Regular oiling keeps it running smoothly and at a lower blade temperature.

Is it a trimmer or shaver too?

No. The FX829E is a fade clipper -- it removes bulk and builds the blend, but it is not a detail outliner or a shaver. For lines and edges add the matching FXONE LO-PROFX grey trimmer (FX729E), and for a foil-close finish add an FXONE foil shaver; all three share the same FXONE battery.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.