JRL 3000C x Diamante Trio Kit Gold & Black

The JRL 3000C x Diamante Trio Kit Gold & Black puts three JRL Professional machines in one order, in the sequence a barber picks them up. You get a clipper for the bulk and the blend, a trimmer for the outline, and a shaver for the last pass. The clipper runs on a brushless motor at 7800 RPM, and JRL marks it for professional use only.

JRL 3000C at a glance

Motor: brushless
Speed: 7800 RPM
Run time and charge time: 2 hours each
Blade adjustment: 0.25-3 mm
Guards: 6

JRL Diamante at a glance

Motor: brushless
Speed: 8,200 RPM
Blade adjustment: 0 to 0.5 mm
Blades: stainless steel fixed blade with titanium coating, moving blade with DLC coating
Guards: 5
Charging base: Reset IQ

JRL Onyx SF PRO SH2301 at a glance

Motor: rotary
Speed: 8000 RPM
Charge time: 2 hours
Run time: 3 hours

In the set

JRL 3000C Gold clipper: charging base, cleaning brush, 6 guards (1.5, 3, 4.5, 6, 10 and 13 mm), blade adjustment and protection tool, lubricating oil, power adapter and screwdriver
JRL Diamante trimmer, black: blade adjustment tool, screwdriver, lubricating oil, cleaning brush, blade protector, power adapter, 5 guards (1.5, 3, 6, 8 and 10 mm) and Reset IQ charging base
JRL Onyx SF PRO SH2301 shaver: cleaning brush, lubricating oil and power adapter

Why this set

A cut in the chair runs in a fixed order: the clipper takes the bulk and builds the blend, the trimmer sets the outline, and the shaver finishes. This set covers all three steps, with one machine for each, and none stands in for another. The trimmer in this set has its own guards and stands on the Reset IQ charging base.

Who it is for

Barbers and hairdressers setting up or renewing a station
Taking the bulk off with the clipper's guards and blending between guard lengths
Barbers who want a clipper, a trimmer and a shaver from JRL in a single purchase

Who it is not for

Home use - the clipper is for professional use only
A barber who needs only one of these machines - each one is also sold on its own

Professional tip

On the clipper, work down through the guards, longest first, and blend each step in instead of jumping sizes. Brush the hair out of the blade between sections, so each length cuts as cleanly as the first.

How to use the clipper

Before the first client, brush the blade clean and put a few drops of the lubricating oil across the teeth.
Charge the clipper on its charging base before use.
Fit a guard, starting with the longest length you need.
Cut against the direction of growth to take the bulk off, then move to the shorter guards to blend.
Between clients, switch the clipper off and brush the hair out of the blade.

Safety: The clipper's blade is sharp. Switch the clipper off, and take it off the charging base or adapter, before you change a guard or adjust or clean the blade. Do not use a blade with a broken or missing tooth. Clean it dry with the brush; never rinse it under the tap or put it in liquid, and keep the clipper and its adapter away from wet surfaces at the station. Keep it out of the reach of children. Do not dispose of it in household waste: recycle it according to local regulations.

Care and maintenance of the clipper

After each client, switch the clipper off, brush the hair from the teeth with the cleaning brush, and wipe the housing with a dry cloth. At the end of the day, and whenever the blade drags, put a few drops of the lubricating oil across the teeth, run the clipper for a few seconds and wipe off the excess. Never rinse it: cleaning stays dry.

Complete your JRL setup

Each on its own - every machine in this set has its own page
JRL 3000C Gold Cordless Clipper
JRL Diamante 2025T05 Professional Cordless Trimmer - Black
JRL Onyx SF PRO SH2301 Shaver

Frequently asked questions

What is in the set?

Three JRL Professional machines: the 3000C clipper, the Diamante trimmer and the Onyx SH2301 shaver. Each one comes with its own accessories.

What is each machine for?

The clipper is for the whole cut, from taking off the bulk to the blend. The trimmer is for the outline: JRL gives it a second-generation EZ-Gap for moving the blade setting up or down. The shaver takes the last pass: JRL describes its foil as ultra-fine, for a close shave without excessive pressure, and it works with or without its power cord.

Is the set meant for home use?

No. JRL marks the clipper for professional use only: it is a clipper for barbers and hairdressers.

How do I clean and oil the clipper's blade?

Dry: the cleaning brush after each client, the lubricating oil at the end of the day. Never rinse the clipper under the tap.

Need help with your order? Visit our customer service center and online shopping FAQ for delivery, payment and returns.

2 free JRL cutting capes worth €49.90 with your set of 3 or more machines from JRL or BaBylissPRO

1 Choose your set

A set of 3 or more machines from JRL or BaBylissPRO.

2 Get 2 gifts

Both capes are added to your cart automatically.

Together: €49.90 €0.00

What do I get for free?
Two capes: the JRL waterproof silicone cutting cape with magnetic closure and the JRL Professional cutting cape Black, together worth €49.90.

What do I need to buy?
A set of 3 or more machines from JRL or BaBylissPRO.

What is the difference between the two capes?
The silicone cape is waterproof and closes with a magnet at the neck, which helps during colouring and washing. The black cape is made of light, water-repellent polyester with an adjustable neck closure, for everyday cutting and blow-drying. That gives you one for wet and one for dry services.

Buying fewer than 3 machines?
A single machine comes with a free BaBylissPRO SprayFX, a duo set with the free silicone cape.

Do I need to do anything?
No. Both free items are added to your cart automatically.

How long does the offer run?
While stocks last, also with multiple purchases. If stock runs out, a free product may be replaced with an equivalent alternative.

Only valid on items where this offer is shown.