Gamma+ XCEED Clipper: Vector IN2 Cordless Barber Clipper

The Gamma+ XCEED Clipper is a cordless barber clipper for bulk removal, tapers and fades - the flagship of the Gamma+ XCEED range, built around the Vector IN2 motor with I.T.C. (intuitive torque control), which idles at 8,500 RPM and rises to 11,500 RPM as the blade meets resistance. A Premium Echo DLC fixed blade with the Crunch function cuts from 0.3 to 1.7 mm across a taper lever, on a 230 g body with an aluminium back.

Gamma+ XCEED Clipper at a glance

Motor: Vector IN2 with I.T.C. (intuitive torque control)
Speed: 8,500 - 11,500 RPM (adapts to resistance)
Fixed blade: Premium Echo DLC with the Crunch function
Cutting length: 0.3 - 1.7 mm across the taper lever
Runtime: Over 2 hours, base or USB Type-C charging
Body: 230 g, aluminium back; 100 - 240 V worldwide
Cleaning: Removable magnetic drop-top lifts off to clear the blade

In the box

Gamma+ XCEED Clipper
Magnetic charging base and USB Type-C cable
Tight comb set: 2 interchangeable magnetic guards (1.5 - 6 mm)
Product-customisation accessories (interchangeable colour accents)

Why the XCEED Clipper

The XCEED Clipper is the range's workhorse: it is made for taking off bulk and building the shape - the body of the cut, the taper and the fade - while the XCEED Trimmer handles the outline. It carries the Vector IN2 motor, and the I.T.C. system reads the load on the blade, idling at 8,500 RPM and lifting toward 11,500 RPM the moment it meets a thicker or denser section, so the clipper keeps a fluid, even cut instead of bogging down. The fixed blade is a Premium Echo DLC - Black Diamond Carbon - and its Crunch function is cut for thinner, deeper grooves that feed hair in cleanly. Length runs from 0.3 to 1.7 mm off a taper lever with a Click side of six marked steps for repeatable lengths and a Freestyle side for stepless fading on the fly, and the magnetic drop-top lifts off to keep the blade area clear.

Key features

Vector IN2 motor with I.T.C. intuitive torque control, 8,500 - 11,500 RPM
Premium Echo DLC (Black Diamond Carbon) fixed blade with the Crunch function
Cutting length 0.3 - 1.7 mm, set on the taper lever
Ergonomic taper lever: a Click side with 6 clicks and a Freestyle side
Removable magnetic drop-top for cleaning, maintenance and lubrication
Aluminium back that reduces vibration and noise
Tight comb set with 2 interchangeable magnetic guards, 1.5 - 6 mm
Over 2 hours of cordless runtime; charges on the fixed base or by USB Type-C
Interchangeable colour accents for product customisation

What to expect in the hand

In the hand the XCEED Clipper sits at 230 g with the weight kept low, so the head is easy to steer through a taper. The aluminium back keeps vibration and noise down over a long day at the chair. The drop-top lifts off magnetically, so the blade area is quick to brush out and oil between clients. On a full charge you get over two hours of cordless work; when it does run down, a spell on the fixed base or a USB Type-C cable brings it back, and the 100 - 240 V range means it charges anywhere in the world. The taper lever falls under the thumb - click through the six marked steps for repeatable lengths, or drop to the Freestyle side to open the fade.

Who it is for

Barbers who want a cordless main clipper for bulk removal, tapers and fades
Anyone building an XCEED kit around a single flagship clipper
Work where a repeatable click length and a stepless fade are both wanted on one lever
Shops that value a light, low-vibration clipper for back-to-back clients

Who it is not for

Fine outlines, lineups and beard detail - that is the XCEED Trimmer's job, not the clipper's
A shaver-close finish on the skin - pair it with the XCEED Shaver for that
Anyone who wants a corded tool; the XCEED Clipper is cordless only

Professional tip

Set your baseline on the Click side of the lever before the client sits down, then work the clipper against the grain to take the bulk down. To open a fade, let the lever climb as you blend upward and keep the drop-top clear so the cut stays clean.

How to use

Charge fully on the base or by USB Type-C before the first cut.
Pick your length on the taper lever - the Click side for a marked, repeatable length, or the Freestyle side for stepless fading.
Fit a magnetic guard (1.5 - 6 mm) for guarded work, or run the blade open for the closest pass.
Take the bulk down first, then blend the taper upward and let the I.T.C. system handle the denser sections.
Lift the magnetic drop-top, brush the blade clear and add a drop of oil after each use.
Switch to the XCEED Trimmer for outlines and beard lines, and keep the clipper for bulk and taper work.

Safety: This is a bladed powered tool. Keep the moving blade away from fingertips and ear edges when it is running, keep it out of the reach of children, and let the blade cool and stop fully before you remove the drop-top or a guard.

Care and maintenance

A simple routine keeps the XCEED Clipper cutting clean. After each client, lift the magnetic drop-top and brush the hair off the Echo DLC and moving blades, then reach for the right Gamma+ care product. The Blade Oil 3 in 1 is your everyday drop of oil on the blade, to lubricate and guard against rust; the Spray Oil 5 in 1 is the quick pass during or right after a cut, cooling the blade and clearing debris in one spray; and the Blade Therapy 7 in 1 is the deep clean - run the blade in the liquid to flush hair and residue from between the teeth, then wipe it dry. And for sectioning hair while you work, add the XanitaliaPro SalonPro hair clips.

In short

Cordless XCEED barber clipper for bulk removal, tapers and fades
Vector IN2 motor with I.T.C. torque control, 8,500 - 11,500 RPM
Premium Echo DLC fixed blade with the Crunch function
0.3 - 1.7 mm on a taper lever: six clicks plus a Freestyle side
Over 2 hours cordless, base or USB Type-C, worldwide voltage

Complete your XCEED setup

Complete the set - the full XCEED range

XCEED Trimmer

XCEED Shaver

XCEED Barber Dryer

Light Blue Combs Set
Keep the blade in shape - clean, cool and lubricate every tool

Blade Oil 3 in 1

Blade Therapy Cleaner

5-in-1 Lubricant Spray
Round out the station - the barber-station essentials

EVO Nano Mister Black

Barber Mat Organizer

Barber Brush

Replacement parts

Genuine Gamma+ replacement blades for the XCEED Clipper. It ships with the Echo blade, and any of these fixed blades fits it - swap the cut type or renew a worn blade.

Frequently asked questions

What do the Vector IN2 motor and I.T.C. do on this clipper?

The Vector IN2 is the high-power motor shared across the XCEED range. I.T.C. - intuitive torque control - means the clipper idles at 8,500 RPM and lifts toward 11,500 RPM when the blade meets a denser section of hair, so the cut stays fluid and even instead of slowing down.

What is the Crunch function on the Echo DLC blade?

The fixed blade is a Premium Echo DLC - Black Diamond Carbon - and Crunch is the way its teeth are cut: thinner and deeper grooves that feed hair into the blade cleanly. It is a blade-geometry feature, not a setting you switch on.

How does the taper lever work - clicks or freestyle?

Both. The lever has a Click side with 6 marked steps, so you can set a length and come back to exactly the same one, and a Freestyle side that moves without steps for opening a fade on the fly. Cutting length runs from 0.3 to 1.7 mm across the lever.

Is this a clipper or a trimmer - can it do my lineups?

It is a clipper, built to take off bulk and build the taper and fade. For outlines, lineups and beard detail you want the XCEED Trimmer. The two are made to work together: clipper for the shape, trimmer for the finish.

What comes in the box?

The XCEED Clipper, a magnetic charging base and USB Type-C cable, a tight comb set with 2 interchangeable magnetic guards from 1.5 to 6 mm, and the interchangeable colour accents for customising the look.

Does the DLC blade still need oiling?

Yes. A DLC (Black Diamond Carbon) coating is hard-wearing, but the blade still needs a drop of oil after each use to run cool and cut cleanly - coated blades are not self-lubricating. Brush the hair out first, then oil the Echo DLC fixed blade and the moving blade.

Can I charge and use it abroad?

The charger is rated 100 - 240 V, so it works on any mains voltage worldwide with the right plug adapter - no voltage converter needed. It charges on the fixed base or straight from a USB Type-C cable, whichever is easier where you are.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.