English
Nederlands
German
Français
The Gamma+ XCEED Shaver is a cordless foil shaver for the finish - the neckline, the cheeks and a smooth bald look - and the shaver in the Gamma+ XCEED range built around the Vector IN2 motor with I.T.C. (intuitive torque control), which idles at 8,500 RPM and rises to 11,500 RPM as the foils meet resistance. Two ultra-thin hypoallergenic gold-titanium foils and a Crunchy cutting blade run off over two hours of cordless runtime, on a 240 g all-aluminium body.
- Motor: Vector IN2 with I.T.C. (intuitive torque control)
- Speed: 8,500 - 11,500 RPM (adapts to resistance)
- Foils: Dual ultra-thin hypoallergenic gold-titanium
- Blade: Crunchy staggered cutting blade
- Runtime: Over 2 hours; X-shaped base or USB Type-C
- Cleaning: Removable foil head lifts off to clear the blade
- Body: 240 g all-aluminium; 100 - 240 V worldwide
In the box
- Gamma+ XCEED Shaver with dual gold-titanium foil head and Crunchy blade
- X-shaped charging base
- USB Type-C cable
- Product-customisation accessories (interchangeable colour X-plates)
Why the XCEED Shaver
The XCEED Shaver is the last tool in the hand: once the clipper has taken the bulk and the trimmer has set the lines, the shaver takes the neckline, the cheeks and a bald finish down smooth. It carries the same Vector IN2 motor as the rest of the XCEED range, and the I.T.C. system reads the load on the foils - idling at 8,500 RPM and lifting toward 11,500 RPM over a denser patch - so the pass stays even. Two ultra-thin gold-titanium foils sit over a Crunchy staggered blade, so each stroke covers more skin and the foils stay kind to it; the whole foil head lifts off for cleaning.
Key features
- Vector IN2 motor with I.T.C. intuitive torque control, 8,500 - 11,500 RPM
- Dual ultra-thin hypoallergenic gold-titanium foils
- Crunchy staggered cutting blade for a close, even finish
- All-aluminium body that reduces vibration and noise
- Removable foil head that lifts off for cleaning
- Over 2 hours of cordless runtime; charges on the X-shaped base or by USB Type-C
- 3-LED indicator for remaining charge
- Interchangeable colour X-plates for product customisation
What to expect in the hand
In the hand the XCEED Shaver is a solid 240 g of aluminium, with the weight low so the head stays flat and easy to steer across the jaw and the nape. The aluminium body keeps vibration and noise down through a long day. The dual foils glide rather than drag, and the 3-LED window tells you the charge at a glance. On a full charge you get over two hours of cordless work; when it runs down, a short spell on the X-shaped base or a USB Type-C cable brings it back, and the 100 - 240 V range means it charges anywhere in the world. The foil head lifts off for cleaning, so clearing the cut hair takes seconds.
Who it is for
- Barbers finishing a fade, a bald look, the neckline or the cheeks
- Anyone already in the XCEED range who wants the matching finishing shaver
- Close, even skin work where a light, low-vibration foil shaver earns its place
- Clients whose skin does better with hypoallergenic gold-titanium foils
Who it is not for
- Bulk removal and taper work - that is the XCEED Clipper's job
- Outlines, lineups and beard detail - reach for the XCEED Trimmer
- A wet or in-shower shave - no water rating is stated, so keep it dry
Professional tip
Let the foils do the work: run the head flat against the skin with light pressure and short passes, going back over an area rather than pressing harder, and glide with the grain before you move across it so the finish stays smooth and the skin stays calm.
How to use
- Charge fully on the X-shaped base or by USB Type-C before the first pass.
- Hold the head flat to the skin and move in short, light strokes.
- Go with the grain first, then across it; let the I.T.C. system handle denser passes.
- Lift the foil head off, brush out the cut hair and add a drop of oil after each use.
- Switch back to the XCEED Clipper or Trimmer for shaping and lines.
Care and maintenance
A simple routine keeps the XCEED Shaver finishing clean. After each client, lift the foil head off and brush the cut hair from the foils and the Crunchy blade, then reach for the right Gamma+ care product. The Blade Oil 3 in 1 is your everyday drop of oil on the blade, to lubricate and guard against rust; the Spray Oil 5 in 1 is a fast between-clients refresh that cools the blade and clears fine debris in one spray; and the Blade Therapy 7 in 1 is the deep clean - run the blade briefly in the liquid to flush hair and residue, then wipe it dry. No water rating is stated, so clean it dry rather than rinsing it. And for sectioning hair while you work, add the XanitaliaPro SalonPro hair clips.
In short
- Cordless XCEED foil shaver for necklines, cheeks and a bald finish
- Vector IN2 motor with I.T.C. torque control, 8,500 - 11,500 RPM
- Dual ultra-thin hypoallergenic gold-titanium foils + Crunchy blade
- Removable foil head; all-aluminium body; 3-LED charge indicator
- Over 2 hours cordless, X-shaped base or USB Type-C, worldwide voltage
Complete your XCEED setup
- Complete the set - the full XCEED range
- Keep the blade in shape - clean, cool and lubricate every tool
- Round out the station - the barber-station essentials
Replacement parts
Genuine Gamma+ replacement head for the XCEED Shaver - drop in a fresh gold-titanium foil head to keep the shave close and clean.
Frequently asked questions
What do the Vector IN2 motor and I.T.C. do on this shaver?
The Vector IN2 is the high-power motor shared across the XCEED range. I.T.C. - intuitive torque control - means the shaver idles at 8,500 RPM and lifts toward 11,500 RPM when the foils meet a denser patch, so the pass stays even instead of slowing down. It is the one Gamma+ shaver that carries this system.
Two foils - what is the benefit over a single foil?
Two ultra-thin gold-titanium foils cover more skin per stroke, so a neckline or a bald finish comes together in fewer passes. A single-foil shaver like the Gamma+ Boosted One Foil has a narrower head that suits lines and tight, hard-to-reach spots; the dual-foil XCEED is built for smooth area work.
Can I rinse it under the tap or use it wet?
No water rating is stated for the XCEED Shaver, so treat it as a dry tool: clean it by lifting the foil head and brushing the hair out, not by rinsing it under water. If you want a splash-proof shaver, the Gamma+ Boosted range carries an IP water rating; the XCEED does not, so keep it dry.
Foil shaver, clipper or trimmer - where does this fit?
The shaver is for the skin-close finish - necklines, cheeks and bald work - not for taking off bulk or drawing lines. Use the XCEED Clipper for bulk, tapers and fades, and the XCEED Trimmer for outlines and beard detail. The three are made to work together.
What comes in the box?
The XCEED Shaver with its dual gold-titanium foil head and Crunchy blade, an X-shaped charging base, a USB Type-C cable, and the interchangeable colour X-plates for customising the look.
Do I still need to oil the foils and blade?
Yes. The gold-titanium foils and the Crunchy blade still need a drop of oil after each use to run cool and cut cleanly - coated blades are not self-lubricating. Lift the foil head, brush the hair out first, then oil the blade.
Can I charge and use it abroad?
The charger is rated 100 - 240 V, so it works on any mains voltage worldwide with the right plug adapter - no voltage converter needed. It charges on the X-shaped base or straight from a USB Type-C cable, whichever is easier where you are.
Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.
Gamma+ XCEED Shaver - Cordless Vector IN2 Dual Foil Barber Shaver
The Gamma+ XCEED Shaver is the XCEED range's finishing shaver: the Vector IN2 motor with I.T.C. torque control (8,500 - 11,500 RPM), dual ultra-thin gold-titanium foils over a Crunchy blade, and over two hours cordless. Compare the other Gamma+ barber shavers below.
