English
Nederlands
German
Français
Dear customer, please note that the Wahl Blade Ice Spray may not be carried by air under air safety regulations. For that reason this item unfortunately cannot be ordered for delivery abroad by air freight.
Wahl Blade Ice Spray 400ml is a cooling and cleaning spray for clipper blades that run hot during long cuts. It is not an oil: oil the blade after you spray. It comes as an aerosol with an extension tube, made in Germany, and carries a full hazard label, set out under Safety below.
- Contents: 400 ml aerosol
- Ingredients: propan-2-ol; isopropyl alcohol; isopropanol, Hydrocarbons, C6-C7, isoalkanes, cyclics, < 5% n-hexane
- Hazard: Danger, with the GHS02 flame and GHS07 exclamation-mark pictograms
- Made in: Germany
- Article: 2999-7900
In the box
- One 400 ml aerosol can with extension tube
Why cool and clean between cuts
Back to back, a clipper blade heats up from one client to the next. The spray is the step between them: it cools the blade and cleans it at the station, and then the blade is oiled before the next cut. Cooling and cleaning is its whole job; the oiling is a separate step.
Who it is not for
- Skin, hair or the client - spray the blade, never the person in the chair
- Disinfecting - it cools and cleans the blade; it is not a disinfectant
- Oiling - the spray leaves that to the Wahl Clipper Oil 118.3ml or the Wahl Special Blade Oil 200ml, after it
Professional tip
Hold the clipper blade-down while you spray, so the spray and the loosened hair run off the teeth and away from the housing. Then follow with oil: the ingredients are solvents, and they leave the teeth dry.
How to use
- Switch the clipper off and turn it away from the client.
- In a ventilated room, spray the blade from a short distance.
- Let it evaporate before the next cut.
- Oil the blade.
Your WAHL care routine
Brush the loose hair off the teeth with the Wahl Cleaning Brush, cool and clean the blade with the spray, then oil it with the Wahl Clipper Oil 118.3ml or the Wahl Special Blade Oil 200ml. Three steps, in that order, between clients.
Complete your WAHL care kit
- Oil after you spray - the step that follows the spray
- Brush the teeth - the loose hair off first
- Round out the station - a place to lay the tools
Frequently asked questions
What does Wahl Blade Ice do, and does it replace oil?
It cools and cleans clipper blades. It does not replace oil: its ingredients are solvents and leave the teeth dry, so oil the blade after you spray.
Is it a disinfectant?
No. It is a cooling and cleaning spray for the blade, and that is all it claims to do.
Can I spray it near the client?
No. The label warns: “Causes serious eye irritation.” Turn the clipper away from the client and spray the blade, never towards the face.
How should I store it?
Below 50 °C, out of sunlight, away from heat and out of children's reach. Dispose of the empty can according to local rules.
Need help with your order? Visit our customer service center and online shopping FAQ for delivery, payment and returns.
Wahl Blade Ice Spray 400ml - Cooling and Cleaning Spray for Clipper Blades, Made in Germany
Wahl Blade Ice is one of the Wahl blade-care products in our shop. Compare it with the others on their own pages.
- Buy minimum 2, Price: €10,78 save 5%
- Buy minimum 4, Price: €10,22 save 10%
- Buy minimum 6, Price: €9,65 save 15%
- Buy minimum 12, Price: €9,08 save 20%
