The Wahl Set cordless Magic Clip Red + Vanish Shaver puts two Wahl Professional machines in one listing, each with its own pass in the cut: the clipper takes the bulk and builds the fade, then the shaver takes the last pass. Each machine is also sold on its own.
- Blade: Chrome plated stagger-tooth blade, 46 mm wide, with CRUNCH BLADE TECHNOLOGY
- Cutting range: Variable Taper 0.5 mm - 1.2 mm, BLADE ADJUSTMENT LEVER
- Run time: up to 100 min, lithium-ion
- Power: cord/cordless clipper, lithium-ion
- Input: 100-240 V~50-60 Hz
- Motor: rotary DC motor, 7600 RPM
- Cutting width: 48 mm
- Cutting length: 0.05 mm
- Run time: 45 min charge = 2 hours run time
- Weight: 181 g / 6.4 oz
- Power: cord/cordless, 2.4 m cable
- Mains input: 100-240 V~50-60 Hz
- Features: Independently Suspended Cutter Bars · Smart LED Fuel Gauge · Travel Lock · Finger grips
- Colour: black/gold
In the set
- Wahl cordless Magic Clip Red
- Wahl Vanish Shaver with its foil guard, cleaning brush and pre-shave brush
Why this set
A cut in the chair runs in a fixed order, and this set follows it. A foil shaver works on hair that is already short, so the length work always comes first and the shaver finishes what the other machine has brought down. The outline stays with the trimmer you already work with. Buying the machines together puts that sequence on one station in one order.
Who it is for
- Barbers cutting fades and tapers who blend with the blade, not only with guards - the clipper pack's captions read Creates seamless blends when hard or soft line fading and Ideal for bulk hair removal
- Shops that offer head shaves or skin-level work on the neck and around the outline, finished with the shaver as the last pass
Who it is not for
- Outlines, line-ups and beard detail - that is a trimmer's job
- Taking long stubble or a full beard straight down with the shaver - bring it down with the clipper or trimmer first
- A barber who needs only one of these machines - each is sold on its own
Professional tip
Build the blend with the clipper's blade adjustment lever in small steps rather than one jump, and finish each upward stroke by flicking the clipper out and away from the head, so the blend is laid down in stages.
How to use
- Before the first client, brush the blade clean and oil it with clipper oil. Check that the shaver's foil is seated and has no dent or tear.
- With the machine off, check that the moving blade sits behind the edge of the fixed blade before it touches skin.
- Clip an attachment guide on the clipper for the length you want, starting longer rather than shorter; take the bulk against the growth, then blend by moving the blade adjustment lever between passes, flicking out at the end of each stroke.
- Finish with the shaver on hair that is already short: stretch the skin, hold the head flat against it and work in short, overlapping passes with light pressure.
- Switch everything off before you put the machines down.
Care and maintenance
After each client, switch off and brush the hair from the teeth and around the blades with a soft, dry brush, and wipe the housings with a dry cloth. Clean the shaver the same way, dry, with its cleaning brush. At the end of the day, and whenever a blade starts to drag, put a few drops of clipper oil across the teeth, run it for a few seconds and wipe off the excess. Brush the hair out of the shaver's foil and cutters without pressing on the foil, and replace the foil and the cutter bars when the foil is damaged or the cut starts to drag. Clean everything dry: never rinse a machine under the tap or put it in liquid.
Complete your Wahl setup
- Other Wahl sets - the same machines in other combinations
- Round out the station - the full Wahl Professional range
Replacement parts
Sold separately in our shop:
Frequently asked questions
What is in the set?
A clipper and a foil shaver from Wahl Professional, each in its own Wahl carton.
Which machine does which job?
The clipper takes the bulk and builds the fade, then the shaver takes the last pass.
How long do the machines run on a charge?
The clipper runs up to 100 min; the shaver runs 2 hours on a 45 min charge.
Can I rinse the machines under the tap?
No. Clean them dry with a brush. Never rinse them under the tap or put them in liquid, and keep them and their cords away from wet surfaces at the station.
Do the blades need oil?
Yes, the clipper blade does. At the end of the day, and whenever a blade starts to drag, put a few drops of clipper oil across the teeth, run it for a few seconds and wipe off the excess. The shaver is cleaned dry with its cleaning brush.
Are replacement parts available?
Yes. They are in the Replacement parts box on this page.
Can I buy the machines separately?
Yes. The links above go to each machine's own page.
Need help with your order? Visit our customer service center and online shopping FAQ for delivery, payment and returns.
Wahl Set cordless Magic Clip Red + Vanish Shaver - Stagger-Tooth Clipper and Foil Shaver
The Magic Clip comes in five of our sets: in black with the Vanish, or with the stealth Beret trimmer and the Vanish; in red with the Vanish, with the Detailer Li, or with the Detailer Li and the Vanish. Choose by the colour and the machines you want beside the clipper.

JRL Black Cape








