English
Nederlands
German
Français
The Wahl Set Legend+ and Vanish Shaver puts two Wahl Professional machines in one listing, each with its own pass in the cut: the clipper takes the bulk and builds the fade, then the shaver takes the last pass.
- Motor: High-Performance 6500 RPM Rotary Motor
- Blade: Precision Wedge™ Blade With Long Fade Range, with Crunch Blade™ Technology
- Cutting range: 0.7 mm - 1.7 mm
- Run time: up to 80 min, Li-ion
- Charging: 60 min
- Weight: 10.7 oz | 304 g
- Housing: New All-Metal Housing
- Motor: rotary DC motor, 7600 RPM
- Cutting width: 48 mm
- Cutting length: 0.05 mm
- Run time: 45 min charge = 2 hours run time
- Weight: 181 g / 6.4 oz
- Power: cord/cordless, 2.4 m cable
- Mains input: 100-240 V~50-60 Hz
- Features: Independently Suspended Cutter Bars · Smart LED Fuel Gauge · Travel Lock · Finger grips
- Colour: black/gold
In the set
- Wahl Legend+ Clipper with its 2 premium cutting guides: 1/16" 1.5 mm · 3/16" 4.5 mm
- Wahl Vanish Shaver with its foil guard, cleaning brush and pre-shave brush
Why this set
A cut in the chair runs in a fixed order, and this set follows it. A foil shaver works on hair that is already short, so the length work always comes first and the shaver finishes what the other machine has brought down. The outline stays with the trimmer you already work with. Buying the machines together puts that sequence on one station in one order.
Who it is for
- Barbers doing soft-line and longer-length fades, tapers and clipper-over-comb - the clipper's pack lists Soft-Line Fading and Seamless Blends, Longer Length Fading and Tapering and Clipper Over Comb Techniques under DESIGNED FOR
- Shops that offer head shaves or skin-level work on the neck and around the outline, finished with the shaver as the last pass
Who it is not for
- Outlines, line-ups and beard detail - that is a trimmer's job
- Taking long stubble or a full beard straight down with the shaver - bring it down with the clipper or trimmer first
Professional tip
Let the clipper's blade do the blend: open the lever in small steps between passes and flick out at the end of each stroke; keep its two guards for the length above the fade.
How to use
- Before the first client, brush the blade clean and oil it with clipper oil. Check that the shaver's foil is seated and has no dent or tear.
- With the machine off, check that the moving blade sits behind the edge of the fixed blade before it touches skin.
- Take the bulk with the clipper on one of its two guards or over the comb, against the growth; then blend by moving the lever between passes.
- Finish with the shaver on hair that is already short: stretch the skin, hold the head flat against it and work in short, overlapping passes with light pressure.
- Switch everything off before you put the machines down.
Care and maintenance
After each client, switch off and brush the hair from the teeth and around the blades with a soft, dry brush, and wipe the housings with a dry cloth. Clean the shaver the same way, dry, with its cleaning brush. At the end of the day, and whenever a blade starts to drag, put a few drops of clipper oil across the teeth, run it for a few seconds and wipe off the excess. Brush the hair out of the shaver's foil and cutters without pressing on the foil, and replace the foil and the cutter bars when the foil is damaged or the cut starts to drag. Clean everything dry: never rinse a machine under the tap or put it in liquid.
Complete your Wahl setup
- Round out the station - the full Wahl Professional range
Replacement parts
Sold separately in our shop:
Frequently asked questions
What is in the set?
A clipper and a foil shaver from Wahl Professional, each in its own Wahl carton.
Which machine does which job?
The clipper takes the bulk and builds the fade, then the shaver takes the last pass.
How long do the machines run on a charge?
The clipper runs up to 80 min on a 60 min charge; the shaver runs 2 hours on a 45 min charge.
Can I rinse the machines under the tap?
No. Clean them dry with a brush. Never rinse them under the tap or put them in liquid, and keep them and their cords away from wet surfaces at the station.
Do the blades need oil?
Yes, the clipper blade does. At the end of the day, and whenever a blade starts to drag, put a few drops of clipper oil across the teeth, run it for a few seconds and wipe off the excess. The shaver is cleaned dry with its cleaning brush.
Are replacement parts available?
Yes. They are in the Replacement parts box on this page.
Need help with your order? Visit our customer service center and online shopping FAQ for delivery, payment and returns.
Wahl Set Legend+ and Vanish Shaver - 6500 RPM Wedge-Blade Clipper and Foil Shaver
Free JRL cutting cape of your choice with your duo set from WAHL, JRL or BaBylissPRO
A set of 2 machines from WAHL, JRL or BaBylissPRO.
The silicone cape is added automatically.
Type BLACK CAPE in the Comments field at checkout.
JRL Silicone Cape
JRL Black Cape
What do I get for free?
One JRL cape of your choice, worth €24.95: the waterproof silicone cape with magnetic closure or the Professional black cutting cape.
Which cape suits me?
The silicone cape is waterproof and closes with a magnet at the neck, which helps during colouring and washing. The black cape is made of light, water-repellent polyester with an adjustable neck closure, for everyday cutting and blow-drying.
How do I choose the black cape?
Type BLACK CAPE in the Comments field at checkout. We then swap the silicone cape in your cart for you.
What if I leave it empty?
Then we ship the silicone cape. The gift cannot be exchanged afterwards.
Buying a single machine or a bigger set?
A single machine comes with a free BaBylissPRO SprayFX, a set of 3 or more machines with both capes.
How long does the offer run?
While stocks last, also with multiple purchases. If stock runs out, the free product may be replaced with an equivalent alternative.
Only valid on items where this offer is shown.
The Wahl Set Legend+ and Vanish Shaver brings two Wahl Professional machines together in one listing: the Legend+ clipper (6500 RPM, 0.7 mm - 1.7 mm) and the Vanish shaver for the last pass. Each machine keeps its own pass in the cut.
