BaBylissPRO 4Artists FXONE Black Barber Station

The BaBylissPRO 4Artists FXONE Black Barber Station brings the all-metal FXONE system into one kit: the FXONE clipper for the cut, the FXONE trimmer for the detail and the FXONE shaver for the finish -- all three sharing the same interchangeable FXONE battery -- plus the Levante 2100W ionic dryer. It is a full pro cut-to-finish set for barbers who want one battery across their tools.

What is in the set

Clipper: FXONE all-metal -- N1 digital motor, 6800 RPM, blue Titanium fade blade
Trimmer: FXONE all-metal -- N1 digital motor, exposed T-blade for detailing
Shaver: FXONE all-metal -- N1 digital motor, 10,000 RPM, black Titanium double foil
Dryer: Levante BAB6950IE -- 2100W professional ionic dryer
Shared battery: one interchangeable FXONE lithium-ion battery runs the clipper, trimmer and shaver
Colour: matte black across the cutting tools
Best for: a full cut, detail, shave and finish on one battery system

In the box -- exactly what you receive

The station is four separately boxed tools, so you receive four original boxes. The clipper, trimmer and shaver each ship with their own FXONE battery and charging base -- three of each across the set:

FXONE Clipper (FX899MBE):
clipper, FXONE battery, dual-voltage charging base, 8 premium guide combs, spare blade cushion, blade guard, screwdriver, cleaning brush and oil.

FXONE Trimmer (FX799MBE):
trimmer, FXONE battery, dual-voltage charging base, spare blade cushion, zero-gap adjustment tool, screwdriver, blade guard, cleaning brush and oil.

FXONE Shaver (FX79FSMBE):
shaver, FXONE battery, dual-voltage charging base, zero-gap adjustment tool, cleaning brush and oil.

Levante Dryer (BAB6950IE):
dryer, two concentrator nozzles and a removable rear filter.

Why the FXONE system

The FXONE tools are built around one idea: a single interchangeable battery that pops out of one tool and into the next. Buy the clipper, trimmer and shaver together and you have a matched all-metal kit on one battery platform, with a spare always charging so you never stop mid-service. The Levante dryer finishes the style at the chair.

Each tool is a serious pro piece in its own right, and bought together they cover a full haircut on one battery platform -- clipper, trimmer, shaver and dryer. The exact spec of each is in the section below.

What each tool does

FXONE Clipper: all-metal housing, N1 digital motor at 6800 RPM and a blue Titanium fade blade for bulk cutting, tapering and fades.
FXONE Trimmer: an exposed T-blade for crisp outlines, edge-ups and beard detail, on the same FXONE battery.
FXONE Shaver: a black Titanium double foil at 10,000 RPM for a close, smooth finish on bald fades and the hairline.
Levante 2100W Ionic Dryer: a long-life ionic dryer to dry, smooth and finish the style.
One shared FXONE battery: the interchangeable battery runs all three cutting tools.

What to expect

Expect a top-tier all-metal kit built around the FXONE battery; with a charged spare you stay cordless all day. Check each tool's own page for the exact runtime. The cutting tools are dry, brush-clean tools and are not washable.

Who it is for

Working barbers who want one battery platform across clipper, trimmer and shaver.
Pros building an all-metal kit that covers a full haircut from one box.
Anyone who wants a spare-battery workflow with no downtime between clients.
Anyone kitting out a chair with a matched cut-to-finish set.

Who it is not for

If you only need one tool, the clipper, trimmer, shaver and dryer are each sold on their own page.
If you want a lightweight plastic body, the FXONE tools are heavier all-metal pro tools.
If you expect washable tools, the cutting tools are dry, brush-clean only.
If you already own an FXONE tool, you may prefer to add single pieces rather than the full set.

Professional tip

Keep a spare FXONE battery on the base while you work: because the same battery moves between the clipper, trimmer and shaver, you can swap in seconds and never lose power mid-fade. Work in order -- clipper for the bulk and taper, trimmer for the lines, shaver for the bald finish, then the Levante to dry -- and keep the clipper and trimmer blades oiled.

How to use the set

Charge the FXONE battery (and a spare) on the base; plug in the Levante dryer.
Clip the bulk and build the taper with the FXONE clipper.
Trim the outline, edge-ups and beard lines with the FXONE trimmer.
Shave the bald areas and hairline close with the FXONE shaver.
Dry and finish the style with the Levante 2100W ionic dryer.
Swap the battery between tools as needed, and oil the clipper and trimmer blades after use.

Safety: The three cutting tools are not waterproof -- keep them, the battery and the base away from water and do not rinse them. They warm slightly in use, which is normal. Do not use any tool with a bent or damaged blade or foil. The dryer is a mains appliance: keep it away from water and never use it near a filled basin, bath or shower. Charge only with the supplied FXONE base, handle the battery with care, and store everything dry, away from children.

Care and maintenance

Look after each tool the way its own page describes. Brush the hair off the FXONE Clipper and FXONE Trimmer blades after every use and oil them regularly -- neglecting it can void the warranty. Brush out the FXONE Shaver foil head and fit a fresh foil when it wears; do not rinse it. Wipe the Levante Dryer and keep its rear filter clear. Keep the FXONE battery contacts clean and dry; none of the cutting tools is washable.

In short

One battery, three tools: the FXONE clipper, trimmer and shaver share the same interchangeable battery.
All-metal pro build: N1 digital motors, Titanium blades and foils, in matte black.
Full workflow: cut, detail, shave and dry -- with the Levante 2100W ionic dryer.
Set or singles: buy the station, or each piece on its own page.

Shop the pieces individually

BaBylissPRO 4Artists FXONE Clipper - Black -- for bulk cutting, tapering and fades
BaBylissPRO 4Artists FXONE Trimmer - Black -- for outlines, edge-ups and beard detail
BaBylissPRO 4Artists FXONE Shaver - Black -- for a close, bald finish
BaBylissPRO Levante Hair Dryer 2100W -- to dry and finish the style

Frequently asked questions

What is included in the barber station?

The set includes four tools: the all-metal FXONE clipper, FXONE trimmer and FXONE shaver -- all three running on the same interchangeable FXONE lithium-ion battery -- plus the Levante 2100W professional ionic dryer. Together they cover a full haircut: cut, detail, shave and finish. Each tool also ships with its own accessories, such as the clipper's guide combs and the FXONE battery and charging base.

Do the tools really share one battery?

Yes. The interchangeable FXONE lithium-ion battery is the point of the system: it releases from one tool with a quick button and drops into the next, so the clipper, trimmer and shaver all run on the same battery. Keeping a spare battery charged on the base lets you swap in seconds and work without downtime. The Levante dryer is a separate mains appliance.

Why buy the set instead of the pieces separately?

The station gives you a matched all-metal kit that covers every step of a cut and shares one battery platform, usually at a set price rather than four separate ones. If you only need one job covered, each tool is still sold on its own page, so you can start with a single piece -- and because they share the battery, adding another FXONE tool later is easy.

Can I add pieces to the set later, or buy a replacement?

Yes. Every tool in the station has its own product page, so you can buy any single piece as a replacement, a spare or a later addition. The clipper, trimmer, shaver and dryer are linked below, each with its own full specification, and the cutting tools all take the same FXONE battery.

Can I wash or rinse the tools?

No. The three cutting tools are dry, brush-clean tools and are not washable, so do not rinse them or their blades under the tap. Brush the hair off the clipper and trimmer blades and oil them, and brush out the shaver's foil head. The dryer is an electrical appliance and must be kept away from water.

Are these all-metal pro tools?

Yes. The FXONE clipper, trimmer and shaver have improved all-metal housings with N1 digital motors, and the clipper and shaver use Titanium blades and foils. They are heavier, top-tier pro tools rather than lightweight everyday tools. If you want a lighter body, look at the FreshFX or Compact LO-PROFX lines instead.

Will the tools work abroad?

The FXONE cutting tools charge on a multi-voltage base, so they work in most countries with just a plug-shape adapter -- not a voltage converter. Always check the Levante dryer's own page for its voltage before travelling, as mains dryers are not always dual-voltage.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.