BaBylissPRO Boost+ Black Barber Set: Clipper Trimmer Shaver Dryer

The BaBylissPRO Boost+ Black Barber Station - Clipper, Trimmer, Shaver & Dryer is a complete four-piece professional kit that covers the whole service at the chair: a Boost+ Black clipper for bulk cutting and fades, a SkeletonFX trimmer for outlines and hard lines, a FoilFX02 GunSteel shaver for a close finish and the Levante ionic dryer to dry and finish -- four matched tools in one set.

At a glance

What it is: Complete 4-piece professional barber set
In the set: Boost+ Black clipper, SkeletonFX trimmer, FoilFX02 GunSteel shaver, Levante 2100W dryer
Cutting: 45 mm fade clipper blade and 40 mm DLC T-blade, both zero-gap adjustable
Finish: Titanium double-foil shaver; ionic AC dryer with cold shot
Power: Clipper, trimmer and shaver cord-or-cordless; dryer on 230-240V mains
Build: All-metal cutting tools, diamond-textured grips; made in China (dryer made in Italy)
Warranty: 1-year warranty on each tool

Why a complete barber station

Every step of a men's service needs a different tool, and this set covers them in one go: bulk and fades, outlining, a close shave, then drying. Buying them as a matched set means one visual language -- black, all-metal cutting tools with diamond-textured grips -- and no gaps in your station. The clipper takes down length and blends, the trimmer's exposed T-blade handles the visible detail, the shaver takes the neckline down smooth, and the dryer clears cut hair and sets the style. It is a professional kit for barbers who want a consistent toolset, not four unrelated devices.

Key features

Boost+ Black clipper: 45 mm fade blade (zero-gap), 5-position taper lever and 8 comb guides, high-torque brushless motor, cord or cordless
SkeletonFX trimmer: fully exposed 40 mm DLC deep-tooth 2.0 T-blade (zero-gap), 7200 rpm motor, 180 minutes from a 4-hour charge
FoilFX02 GunSteel shaver: offset titanium double-foil system, 11,000 RPM motor, cord or cordless, replaceable FXRF2GSE foils
Levante ionic dryer: long-life AC motor, 2100W, 141 km/h airspeed, cold shot and 6-position control, 480 g
Shared design: black, all-metal cutting tools with diamond-textured rubber grips; each tool carries a 1-year warranty

What to expect

This is a set of four full professional tools, not a beginner starter pack -- each one is the same device sold on its own. The three cutting tools run cord or cordless on worldwide 100-240V, but the Levante dryer is a 230-240V mains appliance: made for European sockets, it needs a proper voltage converter in a 110-120V country, not just a plug adapter. Each tool runs on its own adapter -- they do not share one. Expect pro-level maintenance too: blades to oil, foils to replace and a filter to keep clean.

Who it is for

Barbers building or replacing a full station in one purchase
Anyone who wants a matched black toolset rather than mixed brands
Pros who cover the whole service -- cut, detail, shave and dry
Those on 220-240V mains for the dryer

Who it is not for

If you only need one tool, buy the clipper, trimmer, shaver or dryer on its own
If you need a dryer for 110-120V countries, the Levante needs a voltage converter
If you want a home starter kit on a budget, this is professional-grade gear
If you want curly-hair drying out of the box, the dryer includes concentrator nozzles, not a diffuser

Professional tip

Work the set in order and each tool sets up the next. Start with the clipper for bulk and the fade, drop to the trimmer for the outline and hard lines, then take the neckline and any bald areas down with the shaver. Finish with the Levante: a cool blast clears loose cut hair from the neck and face before it itches, and a concentrator nozzle plus the cold shot sets the style. Keep every blade oiled between clients and the whole station stays fast.

How to use

Charge the clipper, trimmer and shaver fully on their own adapters before the service
Clipper first: bulk removal and the fade with the taper lever and comb guides
Trimmer next: outline, edges and hard lines with the exposed T-blade
Shaver: take the neckline and finish areas down smooth
Dryer last: clear loose hair, then dry and set with a concentrator nozzle and cold shot
Clean and oil the blades, and clear the dryer filter, after the service

Safety: Keep every tool, adapter and charging lead away from water; the Levante dryer must never be used near a filled basin, bath or shower. Do not block the dryer's air intake or outlet, and note the grille and airflow get hot even though the finned nozzle sides stay cooler. Charge the cutting tools away from sinks, and do not use any adapter or lead that is damaged. Switch a tool off before adjusting or cleaning its blade or foil, and let the dryer cool before storing. The dryer is a 230-240V appliance.

Care and maintenance

Each tool has its own routine. Brush out and lightly oil the clipper and trimmer blades after use with clipper oil; fit a SkeletonFX Deep Tooth DLC 2.0 T-blade when the trimmer edge dulls. Brush the shaver head clean (it is not waterproof), oil the cutters periodically and replace the titanium foils with FXRF2GSE when the shave feels less close. Keep the dryer airflow strong by clearing its removable rear filter regularly, and wipe bodies with a dry cloth only -- never rinse any of these tools under water. Store each tool dry, cords loosely coiled.

In short

Four matched pro tools: clipper, trimmer, shaver and Levante dryer in one set
Cut and detail: 45 mm fade clipper and exposed 40 mm DLC T-blade trimmer, both zero-gap
Finish: titanium double-foil shaver and ionic 2100W dryer with cold shot
Pro-grade: all-metal cutting tools, cord-or-cordless; dryer on 230-240V mains; 1-year warranty each

Prefer to buy separately?

Boost+ Black Clipper -- the clipper on its own
SkeletonFX Trimmer -- the trimmer on its own
FoilFX02 GunSteel Shaver -- the shaver on its own
Levante Hair Dryer 2100W -- the dryer on its own

Frequently asked questions

What is included in the set?

The set contains four professional tools: the Boost+ Black clipper for bulk cutting and fades, the SkeletonFX trimmer for outlines and hard lines, the FoilFX02 GunSteel foil shaver for a close finish, and the Levante 2100W ionic dryer for drying and finishing. Each tool comes with its own accessories and adapter, exactly as sold individually, packaged together as one kit.

Can I use the dryer abroad, and what about the cutting tools?

The clipper, trimmer and shaver charge on worldwide 100-240V, so abroad they only need a plug-shape adapter. The Levante dryer is different: it is a 230-240V appliance, so in a 110-120V country it will not run properly and needs a proper voltage converter, not just a plug adapter. Always charge or run each tool on its own supplied adapter.

Which tools are cordless, and is the dryer cordless too?

The clipper, trimmer and shaver all run cord or cordless, so you can work off the battery or plug in when it runs low. The Levante dryer is a corded mains tool, as dryers are -- it does not run on a battery. Charge the three cutting tools fully before a busy service so you are not tied to the socket.

Do the tools share one charger?

No. Each cutting tool has its own adapter and the dryer plugs straight into the mains, so keep each tool with its own lead. The clipper, trimmer and shaver have different runtimes and charge times, so charge them separately rather than assuming one is a spare for another. Using the correct adapter for each tool protects its battery.

Which replacement parts fit each tool?

The trimmer takes a SkeletonFX Deep Tooth DLC 2.0 replacement T-blade; the shaver takes FXRF2GSE titanium replacement foils and cutters; the clipper blade and comb guides are replaceable; and the dryer has a removable rear filter you clean rather than replace. Handle the thin shaver foils gently, and change a blade when it dulls rather than forcing a worn edge.

Is this set for beginners or for professionals?

It is a professional kit. Each tool is a full pro device -- the same one sold on its own -- so the set suits barbers building or replacing a whole station rather than someone after a budget home trimmer. If you only need one job covered, buying the single tool you need is the better value; the set makes sense when you want the complete, matched toolset.

Why buy the set instead of separate tools?

Buying the four as a set gives you a matched, consistent toolset in one go -- the same black, all-metal design across the cutting tools -- and covers every step of the service without gaps. It is aimed at barbers who want to kit out a station in a single purchase. If you already own some of these tools, buy only the pieces you are missing instead.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.