BaBylissPRO Compact LO-PROFX Black Barber Station

The BaBylissPRO Compact LO-PROFX Black Barber Station brings the low-profile LO-PROFX system into one kit: the Compact LO-PROFX FX820E clipper for the cut, the FX720E trimmer for the detail and the FXLPFS1E single-foil shaver for the finish -- three compact, ultra-low-profile metal tools -- plus the Vero 2000W ionic dryer to dry and style. A matched cut-to-finish set for barbers who want compact, tactile control.

What is in the set

Clipper: Compact LO-PROFX FX820E -- black Titanium fade blade, 6800 RPM, up to 150 min, USB-C
Trimmer: Compact LO-PROFX FX720E -- 2.0 mm graphite T-blade, 6800 RPM, up to 120 min, USB-C
Shaver: Compact LO-PROFX FXLPFS1E -- single black Titanium foil, 10,000 RPM, up to 75 min
Dryer: Vero BAB6280E -- 2000W professional ionic dryer
Build: ultra-low-profile anodised aluminium housings, matte black
Best for: a compact, low-profile cut, detail, shave and finish kit
Power: three cordless USB-C tools plus a corded 2000W dryer

In the box -- exactly what you receive

The station is four separately boxed tools, so you receive four original boxes. Each arrives in its own packaging with its own accessories:

Compact LO-PROFX FX820E Clipper:
clipper, 8 comb guards, blade guard, USB-C charging cable.

Compact LO-PROFX FX720E Trimmer:
trimmer, blade guard, USB-C charging cable.

Compact LO-PROFX FXLPFS1E Shaver:
shaver, magnetic foil cap, USB-C charging cable.

Vero Dryer (BAB6280E):
dryer, concentrator nozzle, detachable filter.

Why the Compact LO-PROFX system

The Compact LO-PROFX tools take the full-size LO-PROFX line and shrink it: the same ultra-low profile and all-metal build, in bodies that sit lower in the hand and turn more easily. Buy the clipper, trimmer and shaver together and you have a matched compact kit, and because all three are LO-PROFX Compact tools they share the same universal charging base. The Vero dryer finishes the style at the chair.

Each tool is a serious compact pro piece, and bought together they cover a full haircut -- clipper, trimmer, shaver and dryer. The exact spec of each is in the section below.

What each tool does

FX820E Clipper: a high-speed DC motor at 6800 RPM and an ultra-thin black Titanium fade blade, zero-gap adjustable, for bulk cutting, tapering and fades.
FX720E Trimmer: a 360-degree exposed 2.0 mm graphite T-blade, zero-gap adjustable, for crisp outlines, edge-ups and beard detail.
FXLPFS1E Shaver: a single black Titanium foil at 10,000 RPM for a close finish on bald fades and the hairline.
Vero 2000W Ionic Dryer: a professional ionic dryer to dry, smooth and finish the style.
Compact and cordless: three low-profile USB-C tools plus the corded dryer, all in matte black metal.

What to expect

Expect a compact all-metal kit built for control. The cutting tools are smaller, lower-profile versions of the LO-PROFX pro line, easier to turn in tight areas; each runs cordless over USB-C, and the three share the universal LO-PROFX Compact charging base. The cutting tools are dry, brush-clean tools and are not washable.

Who it is for

Working barbers who want a compact, low-profile all-metal kit.
Pros who work in tight areas and want smaller tools that turn more easily.
Anyone who wants one charging system across clipper, trimmer and shaver.
Anyone kitting out a chair with a matched cut-to-finish set.

Who it is not for

If you only need one tool, the clipper, trimmer, shaver and dryer are each sold on their own page.
If you want a full-size body, the standard LO-PROFX line is a larger tool.
If you expect washable tools, the cutting tools are dry, brush-clean only.
If you want a double-foil shaver, the FXLPFS1E is a single-foil finishing shaver.

Professional tip

Work the set in order and let the compact bodies do their job in tight areas: take the bulk and taper with the FX820E clipper, carve the outline and beard lines with the FX720E trimmer, then take the bald areas and hairline close with the FXLPFS1E shaver, and finish with the Vero. Keep the clipper and trimmer blades oiled before and after each use -- a dry blade drags and dulls.

How to use the set

Charge the three cordless tools over USB-C before you start; plug in the dryer.
Clip the bulk and build the taper with the FX820E clipper.
Trim the outline, edge-ups and beard lines with the FX720E trimmer.
Shave the bald areas and hairline close with the FXLPFS1E shaver.
Dry and finish the style with the Vero 2000W ionic dryer.
Brush out and oil the clipper and trimmer blades after use, and store everything dry.

Safety: The three cutting tools are not waterproof -- keep them and their cables away from water and do not rinse them. They warm slightly in use, which is normal. Do not use any tool with a bent or damaged blade or foil. The dryer is a mains appliance: keep it away from water and never use it near a filled basin, bath or shower. Charge each cordless tool only with its own supplied cable, handle the lithium-ion battery with care, and store everything dry, away from children.

Care and maintenance

Look after each tool the way its own page describes. Brush the hair off the FX820E Clipper and FX720E Trimmer blades after every use and oil them regularly -- neglecting it can void the warranty. Lift off the FXLPFS1E Shaver foil to brush it out and fit a fresh foil when it wears; do not rinse it. Wipe the Vero Dryer and keep its rear filter clear. None of the cutting tools is washable, so clean them dry.

In short

Compact, low-profile, all-metal: the FX820E clipper, FX720E trimmer and FXLPFS1E shaver in matte black.
One charging system: three cordless USB-C tools that share the universal LO-PROFX Compact base.
Full workflow: cut, detail, shave and dry -- with the Vero 2000W ionic dryer.
Set or singles: buy the station, or each piece on its own page.

Shop the pieces individually

BaBylissPRO Compact LO-PROFX FX820E Cordless Clipper -- for bulk cutting, tapering and fades
BaBylissPRO Compact LO-PROFX FX720E Trimmer -- for outlines, edge-ups and beard detail
BaBylissPRO Compact LO-PROFX FXLPFS1E Foil Shaver -- for a close, bald finish
BaBylissPRO Vero Professional Ionic Hair Dryer 2000W -- to dry and finish the style

Frequently asked questions

What is included in the barber station?

The set includes four tools in matte black: the Compact LO-PROFX FX820E clipper, the FX720E trimmer, the FXLPFS1E single-foil shaver and the Vero 2000W professional ionic dryer. Together they cover a full haircut -- cut, detail, shave and finish. Each tool also ships with its own accessories, such as the clipper's comb guards and each tool's USB-C charging cable.

What makes these tools compact?

The three cutting tools are reduced-size versions of the LO-PROFX pro line, built in ultra-low-profile anodised aluminium housings. They sit lower in the hand and turn more easily, which helps with control in tight areas like the hairline and around the ears. They keep the LO-PROFX performance in a smaller body, and each still charges cordlessly over USB-C.

Do the tools share a charging base?

The clipper, trimmer and shaver are all LO-PROFX Compact tools and are compatible with the same universal LO-PROFX Compact charging base, so you can keep one base at the chair for all three. Each tool also charges directly over its own USB-C cable. The Vero dryer is a separate mains appliance.

Why buy the set instead of the pieces separately?

The station gives you a matched compact kit that covers every step of a cut, usually at a set price rather than four separate ones. If you only need one job covered, each tool is still sold on its own page, so you can start with a single piece and add the rest later.

Is the shaver a double-foil shaver?

No. The FXLPFS1E is a single-foil finishing shaver with one black Titanium foil, made for a close finish on bald fades and the hairline rather than a full beard take-down. If you want a double-foil shaver, that is a separate model. A magnetic foil cap protects the foil between uses.

Can I wash or rinse the tools?

No. The three cutting tools are dry, brush-clean tools and are not washable, so do not rinse them or their blades under the tap. Brush the hair off the clipper and trimmer blades and oil them, and brush out the shaver's foil. The dryer is an electrical appliance and must be kept away from water.

Will the tools work abroad?

The cutting tools charge over USB-C, so they work in most countries with just a plug-shape adapter -- not a voltage converter. Always check the Vero dryer's own page for its voltage before travelling, as mains dryers are not always dual-voltage.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.