Gamma+ HITTER UP Trimmer: magnetic drop-top, X-PRO blade

The Gamma+ HITTER UP Trimmer is a cordless professional detail trimmer for barbers who line, outline and detail: its removable magnetic drop-top lifts off so you clean and oil the blade in seconds, and a high-power DC rotary motor runs the X-PRO blue titanium nitride blade at 7,000 RPM. The blade adjusts down to zero gap for a crisp line, a set of 4 combs covers 1 to 7 mm, and three interchangeable covers in black, white and amethyst let you build the trimmer around the way you work - all in a light 140 g body with the new skeleton design.

Gamma+ HITTER UP Trimmer at a glance

Motor: High-power DC rotary, 7,000 RPM
Blade: 40 mm X-PRO Blue Titanium Nitride fixed + The One moving blade
Drop-top: Removable magnetic drop-top for cleaning and lubrication
Design: New skeleton design; 3 interchangeable covers (black/white/amethyst)
Zero Gap: Adjustable; combs 1, 3, 5, 7 mm; cut length 0 - 8 mm
Battery: Li-ion, over 2 h; 4-LED level; fixed base, power cable or USB Type-C
Build: Light 140 g; 100 - 240 V

In the box

Gamma+ HITTER UP Trimmer
3 interchangeable covers (black, white, amethyst)
Set of 4 combs (1, 3, 5, 7 mm)
Universal fixed charging base
Power cable and USB Type-C cable

Why the HITTER UP

For a barber, the trimmer draws the lines the clipper cannot, and the HITTER UP is built to be quick to clean and quick to make yours. The magnetic drop-top lifts straight off, so you brush and oil the blade between clients without tools, then click it back on. A high-power DC rotary motor turns the X-PRO blue titanium nitride blade at 7,000 RPM behind The One moving blade, and the blade adjusts down to zero gap for a crisp line. Then three interchangeable covers, in black, white and amethyst, dress the trimmer to the chair - light at 140 g and finished in the new skeleton design.

Key features

High-power DC rotary motor at 7,000 RPM
Removable magnetic drop-top for easy cleaning and lubrication
40 mm X-PRO fixed blade in blue titanium nitride with The One moving blade
Adjustable Zero Gap for a close line
New skeleton design; light 140 g body
3 interchangeable covers in new colours (black, white, amethyst)
Set of 4 combs from 1 to 7 mm; cut length 0 - 8 mm
Li-ion battery with over 2 hours of run time; 4-LED battery level
Full charging on the universal fixed base, by power cable or USB Type-C; 100 - 240 V

What to expect in the hand

In the hand the HITTER UP is a light 140 g, so it sits close and moves quickly around an outline or a beard without tiring the wrist. The X-PRO blue titanium nitride blade rides flat for a clean edge, and set to zero gap it lays a line right up to the skin. When it needs a clean, the magnetic drop-top lifts off in one move - no screws - so the blade is easy to brush and oil. Swap a cover and the same trimmer reads a different way, which is the point: it is modular, made to be set up around how you work.

Who it is for

Barbers who line, outline and detail and want a light, fast trimmer
Anyone who values a quick, tool-free clean with the magnetic drop-top
A barber building a Gamma+ trimmer into a matched kit
Anyone who likes to change the look of the tool with interchangeable covers

Who it is not for

Bulk removal, tapers and fades - that is a clipper's job, reach for the BOOSTED UP Clipper
A barber who wants a heavy full-metal trimmer - reach for the Gamma+ CYBORG
Anyone who wants one fixed look and no cover options

Professional tip

Keep it clean the easy way: lift the magnetic drop-top off before you oil the blade, brush the hair out, add a drop of oil and click the top back on. Let the blade corner ride the line so you draw the edge with the tip rather than the flat, and set the gap before you start the line.

How to use

Charge on the fixed base or by USB Type-C until the 4 LEDs show a full battery.
Fit a cover for the look you want and clip on a comb if you need a set length.
Set the blade to zero gap for a line, or back it off for a soft edge, and line with the corner of the blade.
Lift the magnetic drop-top, brush out the blade and add a drop of oil, then click it back on.
Return it to the base between clients.

Safety: This is a bladed powered tool. Keep the blade away from fingertips when it is running, take care with the blade corners when it is set to zero gap, keep it out of the reach of children, and switch it off before you change a cover or comb or lift the drop-top. Charge it with the supplied base or cable only.

Care and maintenance

A trimmer lines clean when the blade is cared for, and the HITTER UP makes it quick. Lift the magnetic drop-top and brush the hair from the 40 mm X-PRO Blue Titanium Nitride blade and the combs, then reach for the right Gamma+ care product. The Blade Oil 3 in 1 is your everyday drop of oil on the blade, to lubricate and guard against rust; the Spray Oil 5 in 1 is the quick pass during or right after a line-up, cooling the blade and clearing fine debris in one spray; and the Blade Therapy 7 in 1 is the deep clean - run the blade briefly in the liquid to flush hair and residue, then wipe it dry. Click the drop-top back on when you are done. And for sectioning hair while you work, add the XanitaliaPro SalonPro hair clips.

In short

Cordless modular barber detail trimmer with a high-power DC rotary motor at 7,000 RPM
Removable magnetic drop-top for easy cleaning and lubrication
40 mm X-PRO Blue Titanium Nitride blade with The One moving blade; adjustable Zero Gap
New skeleton design; 3 interchangeable covers (black/white/amethyst); light 140 g
Set of 4 combs 1 - 7 mm; Li-ion over 2 h; fixed base, power cable or USB Type-C; 100 - 240 V

Complete your HITTER UP setup

Complete the set - a clipper, dryer and combs for the station

BOOSTED UP Clipper

XCEED Barber Dryer

Light Blue Combs Set
Keep the blade in shape - clean, cool and lubricate every tool

Blade Oil 3 in 1

Blade Therapy 7 in 1

Spray Oil 5 in 1
Round out the station - the barber-station essentials

EVO Nano Mister Black

Barber Mat Organizer

Barber Brush

Replacement parts

Genuine Gamma+ replacement T-blades for the HITTER UP. It ships with the X-PRO Blue Titanium blade, and any of these X-PRO T-blades fits it - swap the material or renew a worn blade.

Frequently asked questions

How powerful is the HITTER UP, and is it cordless?

It runs a high-power DC rotary motor at 7,000 RPM. It is cordless on a Li-ion battery with over 2 hours of run time, with 4 LEDs to show the battery level, and it charges on the universal fixed base, by power cable or by USB Type-C. The charger takes 100 to 240 V.

What is the magnetic drop-top?

The top of the trimmer, which holds the blade, is a removable magnetic drop-top. It lifts straight off with no tools so you can brush and oil the blade in seconds, then clicks back on with magnets. It is what makes cleaning and lubrication quick between clients.

What blade does it use?

A 40 mm X-PRO fixed blade in blue titanium nitride, working with The One moving blade. The blade adjusts down to zero gap for a crisp edge and holds a set gap once you set it. Brush it and add a drop of oil after each client - a coated blade still needs oiling, it is not self-lubricating.

Is it a Zero Gap trimmer?

Yes, the blade is adjustable to zero gap. Bring the blade to a zero-gap setting for a close line, and back it off slightly for a softer edge. Keep light hands when the blade is zero-gapped, and take care with the blade corners.

What covers and combs come with it?

It comes with three interchangeable covers in the new colours - black, white and amethyst - so you can change the look of the same trimmer, plus a set of 4 combs at 1, 3, 5 and 7 mm. The covers are cosmetic; the motor, blade and battery stay the same whichever cover is on.

How do I keep the blade cutting well?

Lift the magnetic drop-top, brush the hair off the 40 mm X-PRO Blue Titanium Nitride blade and add a drop of Gamma+ Blade Oil to keep it cool and gliding; use the Spray Oil for a fast pass during a line-up and the Blade Therapy for a deep clean. Coated blades still need oiling - they are not self-lubricating.

Trimmer or clipper - where does this fit?

The HITTER UP is for lines, outlines and beard detail, not for taking off bulk. Use a Gamma+ clipper such as the BOOSTED UP for bulk, tapers and fades, and the HITTER UP to draw the lines afterwards. The two are made to work together.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.