BaBylissPRO FX3 Titanium Double-Foil Shaver Head

The BaBylissPRO FX3 Titanium Double-Foil Shaver Head and Cutters - Black - 44 mm is the genuine replacement cutting head for the FX3 double-foil shaver -- the wear part you fit when the shave stops feeling close, so the tool goes back to a smooth, crisp finish. Two gold titanium foils sit over two independent cutters across the same 44 mm shaving zone the FX3 was built around.

At a glance

What it is: Genuine FX3 replacement cutting head -- double foil plus two cutters
Best for: Bringing a worn FX3 shaver back to a close, smooth finish
Fits: FX3 shaver FXX3SBE, and any BaBylissPRO FOILFX02 double-foil shaver
Does not fit: Single-foil FOILFX01 / FXFS1E shavers
Foils: Gold titanium double foil
Shaving zone: 44 mm
In the box: One double-foil head and two cutters

Why keep a spare head

On a foil shaver the cutting is done by the head, not the motor: the thin perforated foil catches the hair and the cutter underneath shears it. Both are wear parts -- over time the foil thins and the cutter edges round off, and the shave starts to tug. A fresh head brings that closeness straight back, which is why a busy barber keeps one on the shelf.

Key features

Double-foil head: two gold titanium foils over two independent cutters -- the layout that lets one tool fade a bald blend and clean the hairline.
Titanium foils: chosen for holding a fine edge and staying gentle in contact around sensitive necklines.
44 mm shaving zone: the same coverage as the FX3 shaver it replaces.
Genuine original: made to seat and sit flat exactly like the head that came in the box.

What to expect

Fitted correctly the head clicks into place and sits flush, and the shave feels close again from the first pass. The double foil is built for finishing -- fusing a bald fade and shaving the hairline, neck and cheeks clean -- not for taking down length.

Who it is for

FX3 owners who want the shaver back at its best without buying a new tool.
Any FOILFX02 user: the head is interchangeable across the double-foil range.
Busy shops that would rather swap a head in seconds than lose a chair.

Who it is not for

Single-foil owners: the FOILFX01 / FXFS1E takes the single-foil head, not this double one.
If you need to remove length: a clipper or trimmer does that; this head is for finishing.
If your shaver has a motor fault: a new head fixes a dull shave, not a power problem.

Professional tip

Keep two heads in rotation and swap at the first hint of tug instead of pressing harder on the foils. Pressure wears the foil faster and is tougher on the skin, while a fresh head does the work for you.

How to use

Switch off the shaver before you touch the head.
Release the used head with the catch on the shaver and lift it away.
Align the new head and press until it clicks and sits flat.
Oil the foils and cutters with a light drop of clipper oil.
Test on a small area before you start work.

Safety: the foils and cutters are sharp -- hold the head by its frame, keep it away from children, and do not press hard on the foils. It is a dry accessory: brush it clean, never rinse or immerse it.

Using it with your tools

Brush the hair out of the foils after each client and add a drop of clipper oil to the cutters; do not immerse the head. This is the genuine original for the BaBylissPRO FX3 Double Foil Shaver, and it drops into any BaBylissPRO FOILFX02 double-foil shaver too, so one spare can cover more than one tool.

In short

Genuine replacement: the original double-foil head for the FX3 shaver.
Two foils, two cutters: gold titanium, 44 mm shaving zone.
Fits the wider range: the FX3 and any BaBylissPRO FOILFX02 double-foil shaver.

Complete your kit

BaBylissPRO FX3 Double Foil Shaver FXX3SBE -- the shaver this head is made for
BaBylissPRO FoilFX02 Shaver GunSteel FXFS2GSE -- this head fits the FOILFX02 range too
BaBylissPRO accessories and replacement parts -- oil, guards and other spares

Frequently asked questions

Which shavers does this head fit?

It fits the BaBylissPRO FX3 double-foil shaver (FXX3SBE), and it is interchangeable with any BaBylissPRO FOILFX02 double-foil shaver. That means one spare head can cover more than one tool on your station.

Does it fit the single-foil FOILFX01 or FXFS1E?

No. That shaver uses a single-foil head and this is a double-foil head, so the two are not interchangeable. Match the head to your shaver and choose the single-foil part for a FOILFX01.

How often should I replace the foils and cutters?

There is no fixed schedule -- the foils and cutters are wear parts. Change the head when the shave starts to tug or no longer finishes as close, rather than after a set number of weeks.

Do the foils and cutters need oiling?

Yes. Brush the clippings out and add a drop of clipper oil to the cutters after each use. Even a fresh head runs better and lasts longer when it is kept clean and lightly oiled.

Is the titanium foil suitable for sensitive skin?

Titanium foils are often chosen for close finishing around sensitive necklines because the material holds a fine edge and is gentle in contact. Still keep a light touch and let the head do the work.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.