BaBylissPRO Levante Professional Hair Dryer Ionic 2100W BAB6950IE

The BaBylissPRO Levante Professional Hair Dryer - Ionic 2100W (BAB6950IE) is a professional ionic dryer built for fast, precise drying and finishing at the chair. A long-life AC motor, made in Italy, delivers 141 km/h airspeed and 1000 Pa air pressure, while ionic technology helps control frizz for a smooth finish -- all in a lightweight 480 g body with a cold shot and 6-position speed and temperature control.

At a glance

What it is: Professional ionic hair dryer for fast drying and finishing
Best for: Blow-drying, barber finishing and salon styling
Power: 2100W (1900W at 230V); long-life AC motor; 230-240V mains
Controls: 6-position speed and temperature, plus a cold shot button
Airflow: 141 km/h airspeed, 1000 Pa pressure, 79 m³/h, 5.5 g/min drying rate
In the box: 2 concentrator nozzles (6 x 60 mm and 6 x 75 mm), removable rear filter
Profile: Ionic, lightweight 480 g, 2.70 m swivel cord, made in Italy, 1-year warranty

Why an ionic AC dryer

A professional dryer earns its place by drying fast and lasting through daily use. The Levante uses a long-life AC motor -- the type built for back-to-back salon days -- to push 141 km/h airspeed at 1000 Pa for precise, controlled drying. Ionic technology adds negative ions to help smooth the cuticle and reduce static, so the finish looks smoother with less frizz. The finned concentrator nozzles shape that airflow for section work, while a cold shot locks the style at the end.

Key features

Long-life AC motor: high-performance motor made in Italy, built for daily professional use
2100W of power: 2100W at 240V (1900W at 230V) for fast, precise drying
Ionic technology: adds negative ions to help control frizz and static for a smoother finish
6-position speed and temperature, plus cold shot: dial in the airflow and set the style
2 finned concentrator nozzles (6 x 60 mm and 6 x 75 mm): narrow airflow for section work; the finned sides stay cooler to the touch and can guide the strand
Removable rear filter and 2.70 m swivel cord: easy to clean and move around the chair; 480 g lightweight body

What to expect

Expect fast, controlled drying with a smooth, frizz-free-looking finish -- this is a professional AC dryer aimed at barbers and stylists, not a compact travel unit. It runs on 230-240V mains, so it is made for European sockets and is not dual-voltage: in a 110-120V country it will not run properly and needs a proper voltage converter, not just a plug adapter. It is lightweight at 480 g, but the airflow and grille get hot in use. It comes with two concentrator nozzles; a diffuser is not included.

Who it is for

Barbers finishing cuts and drying at the chair
Salon stylists who want fast, controlled blow-drying
Anyone wanting a lightweight AC dryer for daily professional use
Those on 220-240V mains (Europe and similar regions)

Who it is not for

If you need a dryer for 110-120V countries, this 230-240V model needs a voltage converter -- a plug adapter alone will not run it
If you want a diffuser in the box for curly-hair drying, this dryer ships with concentrator nozzles only
If you want the lightest possible travel dryer, this is a full-size professional tool
If you mainly want a straightener or wand for finished styling, those are separate tools

Professional tip

Rough-dry to about 80 percent first on a higher speed, then switch to a concentrator nozzle and a lower speed to finish each section with tension from a brush -- that is where the smooth, polished look comes from. Point the airflow down the hair shaft, root to tip, to lie the cuticle flat, and finish each section with the cold shot to set it before you move on. Keep the rear filter clean so the airflow stays strong through a full day.

How to use

Fit the concentrator nozzle you need and plug into a 220-240V socket
Set the speed and temperature; higher heat and speed to rough-dry, lower to finish
Rough-dry to around 80 percent, keeping the nozzle moving to avoid concentrating heat in one spot
Finish each section with a brush and the airflow pointed root to tip
Press the cold shot to set each finished section
Switch off, let it cool and clean the rear filter regularly

Safety: Keep the dryer away from water -- never use it near a filled basin, bath or shower, and do not use it with wet hands. Do not block the air intake or the nozzle outlet, and do not cover the dryer while it is running, as this can cause overheating; the grille and airflow get hot even though the finned nozzle sides stay cooler. Keep the rear filter clean, let the dryer cool before storing, and do not use it if the cord or plug is damaged. This is a 230-240V appliance.

Care and maintenance

Keep the airflow strong by cleaning the removable rear filter regularly: slide it off, clear the lint from the mesh and refit it -- a clogged filter makes the motor work harder and run hotter. Wipe the body with a dry cloth only; never rinse a dryer under water. Store it with the 2.70 m swivel cord loosely coiled, not wrapped tightly around the body, to protect the wire. It comes with two concentrator nozzles (6 x 60 mm and 6 x 75 mm) and a removable rear filter. The Levante carries a 1-year warranty.

In short

Long-life AC motor, 2100W: 141 km/h airspeed and 1000 Pa for fast, precise drying
Ionic technology: helps control frizz and static for a smoother finish
6-position control plus cold shot: dial in airflow and set the style; 2 concentrator nozzles
Lightweight and professional: 480 g, 2.70 m swivel cord, 230-240V, made in Italy, 1-year warranty

Complete your barber station

Boost+ BlackFX Clipper -- for bulk cutting and fades at the station
SkeletonFX GunSteel Trimmer -- for outlines, edge-ups and hard lines
FoilFX02 GunSteel Shaver -- for a close, smooth finish

Frequently asked questions

Will it work in my country, and do I need a voltage converter?

It is designed for 220-240V mains, so it works on standard European sockets with just a plug-shape adapter if the socket differs. It is not dual-voltage: in a 110-120V country (such as the US or Canada) it will not run properly and needs a step-up voltage converter rated for its wattage, not only a plug adapter. Running it on the wrong voltage can damage it.

What does the ionic technology actually do?

Ionic technology adds negative ions to the airflow, which helps smooth the hair cuticle and reduce static and flyaways. In practice that means a smoother, less frizzy finish and a bit more shine, especially on longer hair. It runs automatically whenever the dryer is on, so there is nothing to switch. It is a styling aid, not a hair treatment.

What is the cold shot button for?

The cold shot sends a burst of cool air instead of hot. After you have shaped a section with heat, holding the cold shot sets it, because cooling the hair helps the style hold. Use it at the end of each section for a longer-lasting finish. It is also useful for a quick, cooler blast when drying near the skin.

How do I clean the filter, and why does it matter?

Slide off the removable rear filter, clear the lint and hair from the mesh, and refit it -- do this regularly. A clogged filter starves the motor of air, which weakens the airflow and makes the dryer run hotter, shortening its life. Never wash the dryer itself under water; a dry brush or cloth on the filter is enough.

What nozzles are included, and is there a diffuser?

It comes with two narrow concentrator nozzles, 6 x 60 mm and 6 x 75 mm, for focused airflow and section work. Their finned sides stay cooler to the touch during use and can help guide the strand. A diffuser is not included in the box; if you dry a lot of curly hair, factor that in.

Does it get hot, and can I set it down while it is running?

The finned nozzle sides are designed to stay cooler, but the grille and the airflow itself get hot in use, so treat it like any professional dryer. Do not rest it face-down on a soft surface or cover the intake, as blocking airflow can cause overheating. Set it on its side on a heat-tolerant surface, and switch it off when you put it down for long.

Is it suitable for daily professional use?

Yes. It uses a long-life AC motor made in Italy, the type built for back-to-back salon and barber days, and at 480 g it stays light enough for long sessions. The 2.70 m swivel cord gives room to move around the chair without tangling. Keep the filter clean and it will hold strong airflow through a full working day.

Need help with your order? Visit our customer service center & online shopping FAQ for answers on shipping, returns, guarantees, payment security and everything else about your purchase.