The BaBylissPRO FXONE Gold Trio -- Clipper, Skeleton Trimmer & FoilFX02 Shaver (FX899GE + FX799GE + FXFS2GE) is a matched gold three-tool kit that carries a cut from fade to finish. The two FXONE all-metal tools -- the clipper and the skeleton trimmer -- share one interchangeable FXONE lithium-ion battery, so a charged cell runs either. The third tool is the FoilFX02 gold double-foil shaver, a separate line with its own built-in battery, for the close finish. Delivered as three boxes, one per tool.

In the box

• the FXONE gold clipper (FX899GE) with its FXONE lithium-ion battery, dual-voltage base and 8 comb attachments
• the FXONE gold skeleton trimmer (FX799GE) with its FXONE lithium-ion battery and dual-voltage base
• the FoilFX02 gold double-foil shaver (FXFS2GE) with its power cord and storage pouch
• a cleaning brush and lubricating oil for the tools

Why the gold trio

This trio covers the whole service in one gold-matched kit. The FXONE clipper takes hair down and sets the fade on a zero-gap gold Titanium MIM blade at 6,800 RPM; the FXONE skeleton trimmer draws the lines with an exposed gold Titanium/DLC T-blade at 7,200 RPM; and the FoilFX02 gold shaver fuses the fade and cleans the hairline with a gold Titanium double foil at 11,000 RPM. The two FXONE tools share one interchangeable battery you swap between them; the shaver runs on its own built-in battery.

Key features

• FXONE gold clipper (FX899GE): an N1 digital motor at 6,800 RPM behind a zero-gap gold Titanium MIM fade blade, with a 5-position taper (0.5-4.2 mm) and 8 combs.
• FXONE gold skeleton trimmer (FX799GE): a digital motor at 7,200 RPM behind a fully exposed gold Titanium/DLC 40 mm T-blade at 1.6 mm, zero-gap for crisp lines.
• FoilFX02 gold shaver (FXFS2GE): a gold Titanium double foil with twin cutters across a 44 mm zone at 11,000 RPM, for a close finish on the neck, cheeks and hairline.
• One shared FXONE battery: the clipper and trimmer take the same interchangeable FXONE lithium-ion cell and dual-voltage base -- charge one, run either.
• The shaver runs independently: the FoilFX02 shaver is a separate line with its own built-in battery, corded or cordless -- it does not take the FXONE cell.
• Matched gold, worldwide voltage: a coordinated gold set, all three on worldwide 100-240V.

What to expect

This is a mixed-line kit, and that is the point: two FXONE all-metal tools that share a battery, plus a FoilFX02 shaver that matches on gold finish rather than on battery. The gold Titanium blades and foils are chosen for a hard-wearing edge, not for a temperature or skin claim, so keep them oiled. All three are dry tools -- keep them away from water.

Who it is for

• Barbers and stylists who want a matched gold kit that takes a service from fade to finish.
• Fade, line and finish: the FXONE clipper and trimmer for the cut and lines, the FoilFX02 shaver for the close finish.
• FXONE battery sharing: one interchangeable cell runs the clipper and trimmer, so a spare keeps you going.
• A coordinated gold bench: three tools in a matched gold finish, delivered as three boxes.

Who it is not for

• If you expect one battery for all three: only the clipper and trimmer share the FXONE cell -- the FoilFX02 shaver has its own built-in battery.
• If you want the all-metal FXONE shaver in the kit: this trio pairs the FXONE tools with the FoilFX02 gold shaver, a different shaver line.
• If you want a wet or in-shower shave: all three are dry tools and are not waterproof.

Professional tip

Clip the shape, line with the skeleton, shave the finish -- run the service in that order so each tool hands off to the next: take the length and fade with the FXONE clipper, set the outline and parts with the skeleton trimmer at zero-gap, then fuse the base of the fade and clean the hairline with the FoilFX02 shaver. Keep a charged FXONE cell in the base so the clipper and trimmer never stall mid-service.

How to use

1. Charge the FXONE battery for the clipper and trimmer, and the shaver on its own.
2. Cut the bulk and set the fade with the FXONE clipper.
3. Line the hairline, neck and beard with the skeleton trimmer at zero-gap.
4. Fuse the base of the fade and shave the hairline with the FoilFX02 shaver.
5. Swap the FXONE cell between the clipper and trimmer as needed.
6. Oil the blades and foils after each use, brush them clean and store the tools dry.

Care and maintenance

Oil the blades and the shaver cutters after each use, and brush the hair out of every head so the set keeps cutting cleanly. Keep the tools dry and store them with guards and caps on. When the shaver foil dulls or tears, fit the original gold FoilFX02 replacement foils and cutters (FXRF2GE); the trimmer takes the original gold Titanium T-blade. For those parts and oil, see the BaBylissPRO accessories and replacement parts page. And for sectioning hair while you work, add the BaBylissPRO Croco Clips X6.

In short

• Gold fade-to-finish kit: FXONE clipper (6,800 RPM, gold Ti MIM fade) + FXONE skeleton trimmer (7,200 RPM, exposed gold Ti/DLC) + FoilFX02 gold double-foil shaver (11,000 RPM, 44 mm).
• One shared FXONE battery for the clipper and trimmer; the FoilFX02 shaver runs on its own built-in battery.
• Matched gold, worldwide 100-240V, delivered as three boxes.

Frequently asked questions