English
Nederlands
German
Français
The Wahl Set cordless Senior + Vanish Shaver puts two Wahl Professional machines in one listing, each with its own pass in the cut: the clipper takes the bulk and builds the fade, then the shaver takes the last pass. Each machine is also sold on its own.
- Blade: High precision chrome plated blade adjusts to zero-gap
- Cutting range: Variable Taper 0.5 mm - 1.2 mm, BLADE ADJUSTMENT LEVER
- Blade width: 46 mm
- Run time: up to 80 min, Li-ion
- Housing: HEAVY DUTY METAL CASE, in WAHL's words
- Input: 100-240 V~50-60 Hz
- Motor: rotary DC motor, 7600 RPM
- Cutting width: 48 mm
- Cutting length: 0.05 mm
- Run time: 45 min charge = 2 hours run time
- Weight: 181 g / 6.4 oz
- Power: cord/cordless, 2.4 m cable
- Mains input: 100-240 V~50-60 Hz
- Features: Independently Suspended Cutter Bars · Smart LED Fuel Gauge · Travel Lock · Finger grips
- Colour: black/gold
In the set
- Wahl cordless Senior Clipper
- Wahl Vanish Shaver with its foil guard, cleaning brush and pre-shave brush
Why this set
A cut in the chair runs in a fixed order, and this set follows it. A foil shaver works on hair that is already short, so the length work always comes first and the shaver finishes what the other machine has brought down. The outline stays with the trimmer you already work with. Buying the machines together puts that sequence on one station in one order.
Who it is for
- Barbers who taper and fade close to the scalp and cut clipper-over-comb - the clipper pack's captions read Traditional on Scalp Tapering and Fading and Ideal for clipper over comb work
- Shops that offer head shaves or skin-level work on the neck and around the outline, finished with the shaver as the last pass
Who it is not for
- Outlines, line-ups and beard detail - that is a trimmer's job
- Taking long stubble or a full beard straight down with the shaver - bring it down with the clipper or trimmer first
- A barber who needs only one of these machines - each is sold on its own
Professional tip
For clipper-over-comb, keep the comb moving and the clipper flat against it, and let the comb set the length; for the taper, open the blade with the adjustment lever in small steps rather than one jump.
How to use
- Before the first client, brush the blade clean and oil it with clipper oil. Check that the shaver's foil is seated and has no dent or tear.
- If you set a blade to zero-gap, do it with the machine off, then check that the moving blade sits behind the edge of the fixed blade before it touches skin.
- Take the bulk with the clipper on a guard or over the comb, against the growth; then taper by moving the blade adjustment lever between passes, flicking out at the end of each stroke.
- Finish with the shaver on hair that is already short: stretch the skin, hold the head flat against it and work in short, overlapping passes with light pressure.
- Switch everything off before you put the machines down.
Care and maintenance
After each client, switch off and brush the hair from the teeth and around the blades with a soft, dry brush, and wipe the housings with a dry cloth. Clean the shaver the same way, dry, with its cleaning brush. At the end of the day, and whenever a blade starts to drag, put a few drops of clipper oil across the teeth, run it for a few seconds and wipe off the excess. Brush the hair out of the shaver's foil and cutters without pressing on the foil, and replace the foil and the cutter bars when the foil is damaged or the cut starts to drag. Clean everything dry: never rinse a machine under the tap or put it in liquid.
Complete your Wahl setup
- Other Wahl sets - the same machines in other combinations
- Round out the station - the full Wahl Professional range
Replacement parts
Sold separately in our shop:
Frequently asked questions
What is in the set?
A clipper and a foil shaver from Wahl Professional, each in its own Wahl carton.
Which machine does which job?
The clipper takes the bulk and builds the fade, then the shaver takes the last pass.
How long do the machines run on a charge?
The clipper runs up to 80 min; the shaver runs 2 hours on a 45 min charge.
Can the blades be set to zero-gap?
Yes: the clipper's blade adjusts to zero-gap. Make any adjustment with the machine off, then check that the moving blade sits behind the edge of the fixed blade before it touches skin.
Can I rinse the machines under the tap?
No. Clean them dry with a brush. Never rinse them under the tap or put them in liquid, and keep them and their cords away from wet surfaces at the station.
Do the blades need oil?
Yes, the clipper blade does. At the end of the day, and whenever a blade starts to drag, put a few drops of clipper oil across the teeth, run it for a few seconds and wipe off the excess. The shaver is cleaned dry with its cleaning brush.
Can I buy the machines separately?
Yes. The links above go to each machine's own page.
Need help with your order? Visit our customer service center and online shopping FAQ for delivery, payment and returns.
Wahl Set cordless Senior + Vanish Shaver - Metal-Case Taper Clipper and Foil Shaver
Free JRL cutting cape of your choice with your duo set from WAHL, JRL or BaBylissPRO
A set of 2 machines from WAHL, JRL or BaBylissPRO.
The silicone cape is added automatically.
Type BLACK CAPE in the Comments field at checkout.
JRL Silicone Cape
JRL Black Cape
What do I get for free?
One JRL cape of your choice, worth €24.95: the waterproof silicone cape with magnetic closure or the Professional black cutting cape.
Which cape suits me?
The silicone cape is waterproof and closes with a magnet at the neck, which helps during colouring and washing. The black cape is made of light, water-repellent polyester with an adjustable neck closure, for everyday cutting and blow-drying.
How do I choose the black cape?
Type BLACK CAPE in the Comments field at checkout. We then swap the silicone cape in your cart for you.
What if I leave it empty?
Then we ship the silicone cape. The gift cannot be exchanged afterwards.
Buying a single machine or a bigger set?
A single machine comes with a free BaBylissPRO SprayFX, a set of 3 or more machines with both capes.
How long does the offer run?
While stocks last, also with multiple purchases. If stock runs out, the free product may be replaced with an equivalent alternative.
Only valid on items where this offer is shown.
The cordless Senior comes in two of our sets: with the Vanish, or with the stealth Beret trimmer and the Vanish. Choose by whether you want a trimmer beside the clipper.
